• Registered: 2012-05-01
  • Posts: 13

Topic: 3g conection surf over proxy help to config router

hello friends!!

let me explain my problem..

I configure router to use 3g modem and my conection is active!
Type: 3g
Address: 10.121.213.32
Netmask: 255.255.255.255
Gateway: 10.64.64.64
DNS 1: 200.142.132.32
DNS 2: 200.220.227.57
Connected: 1h 5m 6s

but to surf in the web I have to configure proxy in my firefox like this

http proxy  200.122.110.147  port 80

so the openwrt dont have internet access?

and I have to config proxy in all programs for internet access

so the question is..

how to config proxy in openwrt to connect in this proxy and send internet for computers without config http proxy in firefox etc??

thanks for all!!!

  • Registered: 2012-05-01
  • Posts: 13

Re: 3g conection surf over proxy help to config router

another problem..

when using this 3g connection over this proxy some sites dont open ex.

http://wiki.openwrt.org/doc/howto/wired.wan.with.3g.dongle

Error 400

We're sorry, but we could not fulfill your request for /doc/howto/wired.wan.with.3g.dongle on this server.

Your proxy server sent an invalid request. Please contact the proxy server administrator to have this problem fixed.

Your technical support key is: c88e-8515-b783-0251

You can use this key to fix this problem yourself.

If you are unable to fix the problem yourself, please contact openwrt-docs at lists.openwrt.org and be sure to provide the technical support key shown above.

  • Registered: 2012-05-01
  • Posts: 13

Re: 3g conection surf over proxy help to config router

some help please,

some tip or direction for I learn.. I'm totally lost

  • From: Florianopolis/Brazil
  • Registered: 2010-12-22
  • Posts: 87

Re: 3g conection surf over proxy help to config router

Hello gugaoforums,

About the openwrt using internet (i.e: package downloading), you can set the http_proxy variable:

http_proxy=http://myproxy.mydomain.com:8080 opkg update

I never set this env variable system wide but it might not be to much difficult.

Now, about a "transparent proxy", I don't have a good solution. I suggest that you use wpad/pac scripts in order to reduce the configuration work in clients.

However, configuration scripts are not supported by all internet clients and even simple fixed http proxy setup, as you commented, is not fully supported by all clients.

luizluca's Website