Hey,
I'm trying to extend 2 VLANs across a trunk port to the AP, is there an easy way to accomplish this?
Switch: Trunk ----> VLAN A (LAN), VLAN B (WLAN)
Preferably to tag an SSID as a particular VLAN.
Topic: Extending VLANs
The content of this topic has been archived on 23 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
lookup your box in supported hardware section wiki to make sure it supports Vlaning or check if there is a "Switch" tab on networking section in luci
The discussion might have continued from here.
Page 1 of 1