Topic: Routing two subnets between 2 routers (cable or wifi) didn't work.
I try to setup two routers using the configuration as described in http://wiki.openwrt.org/doc/recipes/rou … ng.routing
It won't work. I can ping clients in subnet (192.168.1.0) from router2 (192.168.2.0), but connecions to a printer port 9100 won't work.
While pinging a client in subnet2 from subnet1 I got a Reply from 192.168.1.1: Destination port unreachable message?
I tried the configuration via wan port and via wifi wan port, but did'nt work.
Internet access is ok.
Must be a trick? As I remeber that this was pretty easy using DD-WRT or M0n0Wall to connect two routers via a cable using two subnets.