Topic: Unable to compile luci-trunk+svn8381 in latest openwrt trunk
This is my first post so let me first congrat with all of you for the wonderful work you're doing with openwrt. I've been using a customized backfire-10.03.01 image on a Pirelli DRG A226M (8Mb flash) as a starting point for learning and now I feel eager to experiment more with the latest trunk
Last weekend, following the wiki instructions, I've downloaded through svn the latest trunk and started building a first basic image (thanks god we have quad-cores nowadays ). It all went well and I was able to flash a minimalistic (no gui interface) image to my router. After doing that, I've reconfigured said image to include luci package but I got this error that wasn't able to resolve:
... A luci-trunk+svn8380/po/vi/ushare.po A luci-trunk+svn8380/po/vi/voice_diag.po A luci-trunk+svn8380/po/vi/statistics.po A luci-trunk+svn8380/po/vi/splash.po A luci-trunk+svn8380/po/vi/uvc_streamer.po A luci-trunk+svn8380/po/vi/multiwan.po A luci-trunk+svn8380/po/vi/wol.po Exported revision 8380. Packing checkout... mv: cannot move `/home/pierigno/dev/hacking/FWF226M/trunk/tmp/dl/luci-trunk+svn8380.tar.gz' to `downloads/': Not a directory make: *** [downloads/luci-trunk+svn8380.tar.gz] Error 1 make: Leaving directory `/home/pierigno/dev/hacking/FWF226M/trunk/feeds/luci/luci' make: *** [package/feeds/luci/luci/install] Error 2 make: Leaving directory `/home/pierigno/dev/hacking/FWF226M/trunk' make: *** [package/luci/install] Errore 2
Would you please shed a light on this an point me to the right direction? I've tried to upgrade the luci's feed as suggested in the wiki with the following commands
$> cd ~/dev/hacking/FW226M/trunk $> ./scripts/feeds update $> ./scripts/feeds install -a -p luci $> make package/luci/
But the result is always the same except for the svn revision that gets updated (for now) to 8381. To me it seems that it's related to the Makefile but where to look? I'm not too much acquainted with the syntax of makefile nor have understood completely in which order makefiles get executed.