OpenWrt Forum Archive

Topic: Serial Access to LinkSys WAG54G2

The content of this topic has been archived on 19 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hi,
i have an LinkSys WAG54G2 ADSL2+ Wireless Modem, i'm very interested to access to my modem serial and see boot messages and etc. i have googled about this but found some incomplete articles. i have opened modem cover and i found J2 on the modem board. how can i use J2 to access modem serial console?? can i directly connect a serial (Null Modem Cable) to J2??

thanks a lot.

The discussion might have continued from here.