May someone recommend which jtag cable should I buy in order to debrick my Dockstar ?
Topic: which jtag to debrick my Dockstar ?
The content of this topic has been archived on 25 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Why not a buspirate ?
You have some tutorials for debrick dockstar/pogoplug with.
Is this board enough or should I buy a appropriate cable also ?
Why not a buspirate ?
You have some tutorials for debrick dockstar/pogoplug with.
You need a cable like this one for connect to JTAG : http://www.seeedstudio.com/depot/images … it_LRG.jpg
And a mini-usb for connect buspirate to your computer.
You need a cable like this one for connect to JTAG : http://www.seeedstudio.com/depot/images … it_LRG.jpg
And a mini-usb for connect buspirate to your computer.
May you send me the exact reference because I cannot find it on the site.
It is just the picture there.
So I need this cable , plus the buspirate .
That's right ?
SKU on Seeedstudio store :
Buspirate V3 : THM180C4M
Bus Pirate probe kit : THM199C4M
Mini usb cable : ARD112C5B
Write new uboot with JTAG is not simple first time, but it works.
I found using a 2.5" to 3.5" Laptop IDE Hard Disk HDD Adapter helped to connect between the bus pirate and the dockstar:
thank you very much
I just ordered the two items.
I've got 2 bricked Dockstars to try on .
The discussion might have continued from here.