OpenWrt Forum Archive

Topic: How to access Access Point in Bridge/Repeater mode from network?

The content of this topic has been archived on 17 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
Vaako
10 Feb 2012, 02:42

I use two OpenWRT routers that is setup as one as a gateway and the other is setup as a "Wireless Bridge/Repeater".
The "Wireless Bridge/Repeater" is setup with a static IP address 192.168.2.20.
The clients connected to the "Wireless Bridge/Repeater" use the DHCP server from the gateway.

When I am on the "wireless network, I am able to connect to the "Wireless Bridge/Repeater" IP-Address 192.168.2.20 with no problem.
But when I am on the main (wired) network I am not able to connect to the "Wireless Bridge/Repeater" via the main router to the IP 192.168.2.20 that I give him!

Any help on this is appriciated!

The discussion might have continued from here.