Lan Port Mappings user in /etc/config/network for WZR-HP-G300NH2

Hardware Port   Logical port   LuCI Label   Description
NA                    0            1         CPU port activates/links all ports on Vlan.
1                     1            2         Activates the #1 LAN port
2                     5           CPU        Activates the #2 LAN port
3                     4            5         Activates the #3 LAN port
4                     3            4         Activates the #4 LAN port
WAN                   2            3         Activates the WAN/Internet port

These are port mappings for WZR-HP-G300NH2 with (A0 A0) on the back.

Hi,

We're on the same boat.  After struggling a lot myself, managed to build image after following your thread
https://forum.openwrt.org/viewtopic.php?id=32229. Thanks for it.

My intention was to run freeswitch with conference on the router. But somehow the freeswitch hang when I run it on the router. Any experience running freeswitch on this router?

Actually was thinking to dump this router for D-Link 825 as there is no news on backfire for nh2. But not sure with D-link also I'll end with the same problem on freeswitch.

Any advice?