Re: T-Com SpeedPort w 303V Typ B

Hmm, aeh, I don't want to disturb, but... would somebody care to put down a couple of things in the wiki: http://wiki.openwrt.org/doc/devel/add.new.device

Yeah, obviously there is no "one" guide, but maybe some "general approach". And in the Examples-Section we could point out the devices with odd behavior.

27 (edited by leeon 2011-05-04 15:39:16)

Re: T-Com SpeedPort w 303V Typ B

I have problem with source and patchs, can You send me rom file on  leeon20(a)gmail.com

28 (edited by leeon 2011-05-09 09:08:35)

Re: T-Com SpeedPort w 303V Typ B

Im trying to run wifi but i cant sad I compiled Trunk with 2 patches and there is a problem with wifi  hmm

29 (edited by LaySoft 2011-06-21 15:27:37)

Re: T-Com SpeedPort w 303V Typ B

I have a T-Com SpeedPort w 303V Typ A. Is there any way to install OpenWrt on it? Please publish anybody a working firmware for Typ B, i will try it on Typ A!

Thank you!

Re: T-Com SpeedPort w 303V Typ B

LaySoft wrote:

I have a T-Com SpeedPort w 303V Typ A. Is there any way to install OpenWrt on it? Please publish anybody a working firmware for Typ B, i will try it on Typ A!

It won't work. Typ A has totally different hardware. In worst case you will brick it by trying to flash a typ B firmware (probably it will just reject it).

31 (edited by wrtg_spain 2011-08-21 14:29:15)

Re: T-Com SpeedPort w 303V Typ B

I've downloaded from trunk firmware for these device (SPW303V Annex B), but wifi isn't working, anyone have working wifi on this device?

---update---

ok, my wifi is partially working
i can't turn on wpa/wpa2 and can't turn on n-mode, only 54mbit g-mode

Re: T-Com SpeedPort w 303V Typ B

how can i install luci without internet?

KanjiMonster can you send me a bin packet with luci?

33 (edited by qus 2011-11-19 19:31:26)

Re: T-Com SpeedPort w 303V Typ B

Can anyone tell me how to enable wifi? I used to have it working on my 303, but then I did a clean reinstall... ouch... wifi detect doesn't return anything... Earlier this year I compiled the image myself and it worked with:

config wifi-device  wl0
option type     broadcom
option channel  7
option hwmode   11ng
option htmode   HT20
list ht_capab   SHORT-GI-40
list ht_capab   DSSS_CCK-40
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 0

But now it doesn't like "broadcom" device and complains. wifi discover doesn't generate anything...

/sys/class/ieee80211/ is empty.

34

Re: T-Com SpeedPort w 303V Typ B

Bump

35 (edited by leeon 2011-11-28 09:39:19)

Re: T-Com SpeedPort w 303V Typ B

I use config:
config 'wifi-device' 'wl0'
        option 'type' 'mac80211'

in luci i can only scan wifi network. Seds are visible but i cant connect.

36 (edited by qus 2011-12-30 21:58:00)

Re: T-Com SpeedPort w 303V Typ B

Seeing that wl0/wlan0 is disabled and br-lan is used as wifi (see wiki http://wiki.openwrt.org/toh/t-com/spw303v-b ) I was able to get *something* with following config:

config wifi-device br-lan
option type    net
option channel  7
option hwmode   11g
#option htmode   HT20
#list ht_capab   SHORT-GI-40
#list ht_capab   DSSS_CCK-40
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 0

config wifi-iface
option device   br-lan
option network  lan
option mode     ap
option ssid     proba_QUS
option encryption none

...BUT:

root@OpenWrt:~# wifi discover
/sbin/wifi: export: line 1: CONFIG_br-lan_vifs: bad variable name
root@OpenWrt:~# wifi
/sbin/wifi: export: line 1: CONFIG_br-lan_vifs: bad variable name
root@OpenWrt:~#

Re: T-Com SpeedPort w 303V Typ B

leeon wrote:

I use config:
config 'wifi-device' 'wl0'
        option 'type' 'mac80211'

in luci i can only scan wifi network. Seds are visible but i cant connect.

Try option type broadcom (or better, remove the /etc/config/wireless, and do a wifi detect > /etc/config/wireless after loading the broadcom driver).

38

Re: T-Com SpeedPort w 303V Typ B

Unfortunately, even with /etc/config/wireless deleted, wifi detect > /etc/config/wireless doesn't produce anything on this device. That's the problem...

39

Re: T-Com SpeedPort w 303V Typ B

In this case there is no working driver. See if you can install kmod-brcm-wl, nas and wlc.

40

Re: T-Com SpeedPort w 303V Typ B

But I USED to have WIFI on this very same device! What do you mean there is no working driver? Someone stole it? ;-)

Re: T-Com SpeedPort w 303V Typ B

Hello,  is it possible to connect to the router's USB port?

Re: T-Com SpeedPort w 303V Typ B

http://www.ed-china.com/ARTICLES/2007FEB/3/2007FEB12_NC_NETD_TS_2.PDF

BCM6358 has two usb controllers

Re: T-Com SpeedPort w 303V Typ B

Unless there are unpopulated USB pads on the board, there is no practical way of adding USB ports.

Re: T-Com SpeedPort w 303V Typ B

last question, is it possible to use the GPIO pins?

Re: T-Com SpeedPort w 303V Typ B

Not for USB, if this is what you intend to do.