OpenWrt Forum Archive

Topic: Linksys WRT350nV2.1, OpenWRT, Client+Station mode

The content of this topic has been archived on 31 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hello,

Is it possible to achieve this configuration:

Linksys WRT350 fully holds it's network segment (for example 192.168.1.x) - acts as DHCP server, switches Ethernet ports and WiFi interface (acting like AP station so far). And it connects to ANOTHER WiFi network (encrypted or not) and routes traffic to this network like to WAN segment.

I've found some documents in wiki about Broadcom chipsets and bridging two segments, but I don't need bridge, I need a routing between two segments.

Is it possible?

With brcm-2.4 it is.

I forgot to say, I have a Linksys WRT350n V2.1 and it uses Marvel chipset - it is problem or not?

May be it's possible via another wifi dongle plugged into USB port on this router?

The discussion might have continued from here.