Hi all,
I'm new in this forum and probably my questions have easy answer for you...
I've installed openwrt-HW553-jffs2-64k-cfe.bin on my VS and it works fine; now I want to install mochad (http://sourceforge.net/apps/mediawiki/mochad/index.php?title=OpenWrt ... this is an how-to easy to adapt to backfire... ) so I prepared my work environnemend to add mochad feed and everything looks to be right... I can see the mochad entry in the utilities sub-tree!
My problem is that I would like to have all features present in the original openwrt-HW553-jffs2-64k-cfe.bin image and just add my mochad "extension" but I cannot find any .config file and/or feeds list used to make that image!!!
(I found the image here --> http://downloads.openwrt.org/snapshots/ … 4k-cfe.bin )
In few words I would like to have the starting .config of the openwrt-HW553-jffs2-64k-cfe.bin in order to load it before personalize my firmware, DO YOU KNOW WHERE CAN I FIND IT?!?
Few post up I saw the dk_giuse89's message and his megaupload (http://www.megaupload.com/?d=LSIQR1C9), it should be perfect but it looks strange that my file openwrt-HW553-jffs2-64k-cfe.bin is about 3.2MB, that one in the package is 13MB... so probably they come from different .config...
Tnx to all!!
(Last edited by chc on 19 Dec 2011, 19:52)