The content of this topic has been archived on 7 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hello
I want to install "ntpclient" in Backfire 10.03 with the command "opkg install ntpclient"....
But everytime I press ENTER it shows the following ERROR:
Collected errors:
* opkg_install_cmd: Cannot install package ntpclient.
So wath happend??? Can somebody help me please?
Thanks
ORH2O
So I found the problem, i had to update the opkg. But now i have an other problem... I want to give the following command "etc/init/ntpclient enable"... it doesn't work. It shows this message " 'bin/sh: can't open '/etc/rc.common"
What i have to do?
I happy for every help....
Thanks
I don't think you have to enable ntpclient. There is no entry in /etc/init.d for ntpclient. It is tied to the hotplug interface event. See /etc/hotplug.d/iface/20-ntpclient. Therefore, it automatically starts up when an interface starts up. You can configure it via /etc/config/ntpclient. Confirm it's running by "ps | grep ntp".
Thank you, but i found out what the problem is....
The space is to small for openvpn..... Does it give a way to make the space bigger?
The discussion might have continued from here.