OpenWrt → General Discussion → DIR-825 radio led
I'm using Backfire 10.03 with my DIR-825 but I cannot enable the wireless radio LEDs.
None of the ath9k-phy0/1:radio, assoc, tx or rx responds to default ON state toggle or any other event trigger.
I'd appreciated any advice!
Anybody?
Seems it's the same bug as this one reported 6 weeks ago but still not fixed: https://dev.openwrt.org/ticket/7090
Sorry no new information on that, but I can confirm this issue. All leds were working exempt ath9k-phy0 and ath9k-phy1.
I tried the following configuration without any success:
config led
option sysfs 'ath9k-phy0::radio'
option trigger netdev
option dev wlan0
option mode 'link tx rx'
config led
option sysfs 'ath9k-phy1::radio'
option trigger netdev
option dev wlan1
option mode 'link tx rx'Has anyone tried this yet?
Sorry no new information on that, but I can confirm this issue. All leds were working exempt ath9k-phy0 and ath9k-phy1.
Seems that currently nobody is actively working on OpenWrt and DIR-825. This led bug remains opened two months now without been investigated yet. Same with some even more serious WEP/wireless issues reported weeks ago. Latest trunk changes broke the whole wep/auth mechanism on DIR-825 but still nobody cares. It's open source I know, but still... 
Unfortunately I had to revert back to stock firmware because of these, although I do love OpenWrt minimalistic form.
bump
10.03.1-rc3.
Still not working(
https://dev.openwrt.org/ticket/7090
Looks like there is a solution. Now we only need the deveopers to notice it.
https://dev.openwrt.org/ticket/7090
Looks like there is a solution. Now we only need the deveopers to notice it.
This problem exists six months now and nobody cares, even though DIR825 is one of the most widely used router.
all you have to add is this "START;" 
ddfs wrote:https://dev.openwrt.org/ticket/7090
Looks like there is a solution. Now we only need the deveopers to notice it.This problem exists six months now and nobody cares, even though DIR825 is one of the most widely used router.
It is being worked on, its being discussed in the mailing list, since its duplicates a lot of the code as the netgear wndr3700. Your precious LEDs will be working soon. 
Your precious LEDs will be working soon.
Soon? yeah! A year since this issue first surfaced and the only we have is some unofficial and broken patch. 
I'm confused... So at the moment we just have to wait until it is fixed in trunk? No way to fix this manually in RC4?
It's already fixed in trunk a while ago. But still not ported to backfire, I suppose.
It's already fixed in trunk a while ago. But still not ported to backfire, I suppose.
Thanks for the reply, so i will try trunk instead, seems to be much better with this machine then Backfire.
OpenWrt → General Discussion → DIR-825 radio led
Powered by PunBB, supported by Informer Technologies, Inc.