Topic: Backfire 10.03.1-rc3

The content of this topic has been archived on 15 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

Bartman007

28 Aug 2010, 23:14

The OpenWrt Release Team would like to announce a third release candidate (RC3) for Backfire Interim Release 1 (10.03.1). Testing of this release candidate will allow further refinement of 10.03.1

Binaries can be downloaded at http://downloads.openwrt.org/backfire/10.03.1-rc3/

Changes since Backfire 10.03.1 RC2:
* tslib, directfb and depenencies no longer included in images. This problem was introduced by changes in qt4 between rc1 and rc2
* Minor ath9k improvements
* Switch drivers enabled on ar7

Known Issues:
* PPPoE WAN links can be unstable (Ticket #7793)

Detailed report at https://dev.openwrt.org/milestone/Backfire%2010.03.1

Detailed Core ChangeLog at https://dev.openwrt.org/log/branches/ba … 2753-22797
Detailed Packages ChangeLog at https://dev.openwrt.org/log/packages?revs=22753-22797

Yours truly,
--
The OpenWrt release management team
Andy Boyett & Nicolas Thill

Post #2

aboaboit

30 Aug 2010, 22:13

Bartman007 wrote:

The OpenWrt Release Team would like to announce a third release candidate (RC3) for Backfire Interim Release 1 (10.03.1). Testing of this release candidate will allow further refinement of 10.03.1

Sadly, the issue I reported for rc1 and for rc2 is still very much alive: after a while the bridge detects a topology change and the streaming is interrupted.

How can I debug the issue in rc3 ? This is an excerpt from the router logs:

Aug 30 23:03:45 router-casa-andrea daemon.info hostapd: wlan0: STA 00:1c:df:9e:36:4b WPA: group key handshake completed (WPA)
Aug 30 23:03:45 router-casa-andrea daemon.info hostapd: wlan0: STA 00:12:0e:b3:c0:b1 WPA: group key handshake completed (WPA)
Aug 30 23:03:45 router-casa-andrea daemon.info hostapd: wlan0: STA 00:18:84:1c:9d:05 WPA: group key handshake completed (WPA)
Aug 30 23:10:59 router-casa-andrea user.info kernel: br-lan: received tcn bpdu on port 3(wlan0.sta3)
Aug 30 23:10:59 router-casa-andrea user.info kernel: br-lan: topology change detected, propagating
Aug 30 23:13:45 router-casa-andrea daemon.info hostapd: wlan0: STA 00:1c:df:9e:36:4b WPA: group key handshake completed (WPA)
Aug 30 23:13:45 router-casa-andrea daemon.info hostapd: wlan0: STA 00:12:0e:b3:c0:b1 WPA: group key handshake completed (WPA)
Aug 30 23:13:45 router-casa-andrea daemon.info hostapd: wlan0: STA 00:18:84:1c:9d:05 WPA: group key handshake completed (WPA)
Aug 30 23:20:31 router-casa-andrea user.info kernel: br-lan: received tcn bpdu on port 3(wlan0.sta3)
Aug 30 23:20:31 router-casa-andrea user.info kernel: br-lan: topology change detected, propagating

and from the fonera:

Aug 30 23:10:59 foneratv user.info kernel: br-wan: neighbor 8000.00:17:31:d6:97:7a lost on port 2(ath0)
Aug 30 23:10:59 foneratv user.info kernel: br-wan: topology change detected, propagating
Aug 30 23:20:31 foneratv user.info kernel: br-wan: neighbor 8000.00:17:31:d6:97:7a lost on port 2(ath0)
Aug 30 23:20:31 foneratv user.info kernel: br-wan: topology change detected, propagating

(Last edited by aboaboit on 30 Aug 2010, 22:23)

Post #3

pitris

31 Aug 2010, 16:23

Hello,
there's a broken package dependency for nmap or some libs in some package is missing (/backfire/10.03.1-rc3/ar71xx/):

BusyBox v1.15.3 (2010-07-10 11:43:31 PDT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 Backfire (10.03.1-rc3, r22796) --------------------
  * 1/3 shot Kahlua    In a shot glass, layer Kahlua 
  * 1/3 shot Bailey's  on the bottom, then Bailey's, 
  * 1/3 shot Vodka     then Vodka.
 ---------------------------------------------------

root@rs:~# nmap
-ash: nmap: not found
root@rs:~# opkg install nmap
Installing nmap (5.35DC1-1) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/ar71xx/packages/nmap_5.35DC1-1_ar71xx.ipk.
Installing libdnet (1.11-2) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/ar71xx/packages/libdnet_1.11-2_ar71xx.ipk.
Installing libpcre (8.10-1) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/ar71xx/packages/libpcre_8.10-1_ar71xx.ipk.
Installing uclibcxx (0.2.2-3) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/ar71xx/packages/uclibcxx_0.2.2-3_ar71xx.ipk.
Configuring libpcre.
Configuring libdnet.
Configuring uclibcxx.
Configuring nmap.
root@rs:~# nmap
nmap: can't load library 'libnl.so.1'
root@rs:~# ldd nmap
        libm.so.0 => /lib/libm.so.0 (0x2aabe000)
        libpcre.so.0 => /usr/lib/libpcre.so.0 (0x2aae7000)
        libpcap.so.1.0 => /usr/lib/libpcap.so.1.0 (0x2ab14000)
        libnl.so.1 => not found
        libdl.so.0 => /lib/libdl.so.0 (0x2ab51000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x2ab64000)
        libc.so.0 => /lib/libc.so.0 (0x2ab84000)
        ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x2aaa8000)

Post #4

zoo

2 Sep 2010, 07:08

Since IPv6 is enabled for all packages now, I suggest to also include IPv6 firewalling (backporting it from trunk).
Is this possible? It'ld be great.

Post #5

mrii

5 Sep 2010, 08:53

md5 mismatch in libpthread on brcm-2.4

root@wrt54g:/etc/config# opkg install iftop
Installing iftop (0.17-2) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages/iftop_0.17-2_brcm-2.4.ipk.
Installing libpcap (1.0.0-2) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages/libpcap_1.0.0-2_brcm-2.4.ipk.
Installing libpthread (0.9.30.1-43.3) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages/libpthread_0.9.30.1-43.3_brcm-2.4.ipk.
Configuring libpcap.
Collected errors:
 * opkg_install_pkg: Package libpthread md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'.
 * opkg_install_cmd: Cannot install package iftop.

Post #6

GregorHoffleit

16 Sep 2010, 12:38

Just a suggestion regarding the project's webpage:

It would be nice if the homepage showed publication dates for the articles.

Currently, the articles on the homepage have no dates. From looking at the homepage, you don't get a clue whether 10.03.1-rc3 was released yesterday or a year ago.

Regards,
Gregor Hoffleit

Post #7

xerces8

24 Sep 2010, 15:21

He he, I suggested that months ago. :-p

Maybe (at least for future news items) the publish date can be part of the text body (first line or so)

David

Post #8

hexdump

30 Sep 2010, 22:44

mrii wrote:

md5 mismatch in libpthread on brcm-2.4

root@wrt54g:/etc/config# opkg install iftop
Installing iftop (0.17-2) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages/iftop_0.17-2_brcm-2.4.ipk.
Installing libpcap (1.0.0-2) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages/libpcap_1.0.0-2_brcm-2.4.ipk.
Installing libpthread (0.9.30.1-43.3) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages/libpthread_0.9.30.1-43.3_brcm-2.4.ipk.
Configuring libpcap.
Collected errors:
 * opkg_install_pkg: Package libpthread md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'.
 * opkg_install_cmd: Cannot install package iftop.

Were you able to resolve the libpthread md5sum mismatch? I am having the same issue installing samba3.

Post #9

connexion2000

2 Oct 2010, 11:43

Hi,
minidlna doesn't work. It is visible, but when browsing directories, they are empty. In my log I can find:

 [2010/08/19 04:21:04] metadata.c:657: warn: Opening /mnt/Media/Filmy/movie.avi failed!
[2010/08/19 04:21:04] scanner.c:503: warn: Unsuccessful getting details for /mnt/Media/Filmy/movie.avi!

Any fixes for it?

Post #10

DkSoul

3 Oct 2010, 16:20

connexion2000 wrote:

Hi,
minidlna doesn't work. It is visible, but when browsing directories, they are empty. In my log I can find:
 [2010/08/19 04:21:04] metadata.c:657: warn: Opening /mnt/Media/Filmy/movie.avi failed!
[2010/08/19 04:21:04] scanner.c:503: warn: Unsuccessful getting details for /mnt/Media/Filmy/movie.avi!
Any fixes for it?

See https://dev.openwrt.org/ticket/7837

Post #11

esplinter

4 Nov 2010, 19:21

pitris wrote:

Hello,
there's a broken package dependency for nmap or some libs in some package is missing (/backfire/10.03.1-rc3/ar71xx/):

BusyBox v1.15.3 (2010-07-10 11:43:31 PDT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 Backfire (10.03.1-rc3, r22796) --------------------
  * 1/3 shot Kahlua    In a shot glass, layer Kahlua 
  * 1/3 shot Bailey's  on the bottom, then Bailey's, 
  * 1/3 shot Vodka     then Vodka.
 ---------------------------------------------------

root@rs:~# nmap
-ash: nmap: not found
root@rs:~# opkg install nmap
Installing nmap (5.35DC1-1) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/ar71xx/packages/nmap_5.35DC1-1_ar71xx.ipk.
Installing libdnet (1.11-2) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/ar71xx/packages/libdnet_1.11-2_ar71xx.ipk.
Installing libpcre (8.10-1) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/ar71xx/packages/libpcre_8.10-1_ar71xx.ipk.
Installing uclibcxx (0.2.2-3) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/ar71xx/packages/uclibcxx_0.2.2-3_ar71xx.ipk.
Configuring libpcre.
Configuring libdnet.
Configuring uclibcxx.
Configuring nmap.
root@rs:~# nmap
nmap: can't load library 'libnl.so.1'
root@rs:~# ldd nmap
        libm.so.0 => /lib/libm.so.0 (0x2aabe000)
        libpcre.so.0 => /usr/lib/libpcre.so.0 (0x2aae7000)
        libpcap.so.1.0 => /usr/lib/libpcap.so.1.0 (0x2ab14000)
        libnl.so.1 => not found
        libdl.so.0 => /lib/libdl.so.0 (0x2ab51000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x2ab64000)
        libc.so.0 => /lib/libc.so.0 (0x2ab84000)
        ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x2aaa8000)

just install the missing lib: opkg install libnl

Post #12

framer99

7 Nov 2010, 17:55

The package MD5 issue was bugging me too so I dug into it for the gpsd package and here's what I found:

http://downloads.openwrt.org/backfire/10.03.1-rc1/brcm-2.4/packages/gpsd package
e9884605522c6f0483489001ee587307  MD5 of actual .ipk file
e9884605522c6f0483489001ee587307  MD5 in packages.gz

http://downloads.openwrt.org/backfire/10.03.1-rc2/brcm-2.4/packages/gpsd package
fc6423f6b637dc5e217c9d8727dfc6d4  MD5 of actual .ipk file
e9884605522c6f0483489001ee587307  MD5 in packages.gz

http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages/gpsd package
fc6423f6b637dc5e217c9d8727dfc6d4  MD5 of actual .ipk file
fc6423f6b637dc5e217c9d8727dfc6d4  MD5 in packages.gz

yesterday i was on rc2, so md5 sums really don't match.... but it's nothing sinister it seems, since the rc3 packages.gz now shows the md5sum of the package released with rc2. I guess it changed for rc2, but packages.gz didn't get updated. whatever... rc3 is out and things do match for it..

so, I wiped and installed rc3 clean... STILL get md5sum mis-match error.

check /etc/opkg.conf... still set to use rc2 repository...

root@OpenWrt:/tmp# grep src /etc/opkg.conf
src/gz packages http://downloads.openwrt.org/backfire/10.03.1-rc2/brcm-2.4/packages
root@OpenWrt:/tmp#

Fix with:

root@OpenWrt:/tmp# sed 's/rc2/rc3/' /etc/opkg.conf > /tmp/opkg.conf ; mv -f /tmp/opkg.conf /etc/opkg.conf ; grep src /etc/opkg.conf
src/gz packages http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages
root@OpenWrt:/tmp#

Now update opkg lists (re-read packages.gz to pick up real rc3 packages.gz)

root@OpenWrt:/tmp# opkg update
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages/Packages.gz.
Inflating http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/packages.
root@OpenWrt:/tmp# opkg install gpsd
Installing gpsd (2.94-1) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc3/brcm-2.4/packages/gpsd_2.94-1_brcm-2.4.ipk.
Configuring gpsd.
root@OpenWrt:/tmp#

(Last edited by framer99 on 7 Nov 2010, 17:58)

The discussion might have continued from here.

Page 1 of 1