The content of this topic has been archived on 29 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi all
I successfully compiled openwrt Revision: 16733 for compex wp543. While booting the kernel ethernet is not detecting.
The error message while booting linux
==============================
ag71xx_mdio: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: no PHY found with phy_mask=00000008
(Last edited by insane on 8 Jul 2009, 07:38)
hi insane ...
I also noticed the same problem. As a network device ethernet driver is basic requirement. I dont know why they missed it. If anyone can give a solution for this it will be good. And we can make openwrt a bug free software.
Cheersssssssss
GoKs
Hi
This problem is only in 2.6.28 kernel . 2.6.26 and 2.6.29 are working fine.
This problem is only in 2.6.28 kernel.But i will try my best.The version of 2.6.26 are working very fine.
The discussion might have continued from here.