OpenWrt Forum Archive

Topic: OLSR LinkQuality measurement

The content of this topic has been archived on 15 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
Mihagie
11 Jan 2007, 14:56

Hi,

I'm using olsr+openwrt on a Asus wl500g and now I want to use the link quality option where you can see LQ (Link Quality) and NLQ (neighbour link quality).
When I connect my windows laptop (with olsr) with the asusbox I can see the LQ and NLQ levels.
But I can't see this levels on the asusbox. I've tried every debug level but the only output is:
DUP TABLE:
[169.254.1.7] s: 30147
[169.254.1.7] s: 30144

And that is it. Linq Quality measurement seems to work on the asubox because I can see the NLQ level on my laptop.
In my olsrd.conf the settings seems ok.

Can somebody help me how to print this information?

Thanks.

Post #2
SD-6
17 Jan 2007, 17:27

Hi,

same Problem here on a Linksys WRT54GL 1.1
Don't know what to do? any suggestions?

THX
SD-6

The discussion might have continued from here.