The content of this topic has been archived on 19 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
I know that this fits under the larger question of "what kind of linux support with airgo chips have" which seems to be an interesting one. But the WL500W here looks like it might become the greatest hacking platform EVER, replacing all my WRT54GS routers I currently own.
Could this be added as "untested" to the TableOfHardware? And what can I do to help with the airgo problem?
To be "the greatest hacking platform EVER", it would need at least 64 MB RAM, and 300 MHz CPU.
Which I doubt it has.
Sounds like the ASUS WL-700gE though.
Yep. WL-700gE has a HDD, which not everyone might want to have (noise) and pay for.
I'm fairly confident that the WL500W doesn't have a hdd, because they advertise that you can have unattended bittorrent downloads etc by using an external USB harddrive.
It seems like a good thing to me. I just wish I could get some data on the box, I've emailed Asus but they haven't responded yet. As of now I have now clue what the specs are for it.
I checked FCC website if they have any photos of this device, but for all ASUS devices, there was only WL-500G premium (not counting phones, laptops, wireless cards etc.).
I also checked the GPL sources, and it has a mipsel CPU, although not sure how fast, and what mips precisely.
Firmware size is above 7 MB, so probably it has 8 MB flash.
So let's hope ASUS sends you some more specs, like CPU speed and RAM.
http://files.wl500g.info/asus/wl500w/img/
BCM5325 switch, BCM4321 radio on MiniPCI (WL-121W), VIA VT6212L USB2, two TTL serials. Board looks just like WL500gP so might be BCM4704 CPU, 8M flash and 32M ram.
Well doesn't the BCM4704 run (for most revisions) at 264MHz? But I'm hoping that's not what it has, because 32M ram isn't a lot to work with. But for the application I have in mind, it would be just fine.
mangoo, where did you get the gpl sources?
The link in the first post -> downloads -> somewhere there you have the sources.
I didn't actually look at the sources; only saw that there are mipsel cross-compilers there.
Hi, all.
Today I got wl-500w, and attached serial console to it.
Here's a boot log of original firmware.
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ?G 6??13 16:25:32 CST 2006 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
CPU type 0x29006: 264MHz
Total memory: 33554432 KBytes
Total memory used by CFE: 0x80800000 - 0x8089B600 (636416)
Initialized Data: 0x80831770 - 0x80833E50 (9952)
BSS Area: 0x80833E50 - 0x80835600 (6064)
Local Heap: 0x80835600 - 0x80899600 (409600)
Stack Area: 0x80899600 - 0x8089B600 (8192)
Text (code) segment: 0x80800000 - 0x80831770 (202608)
Boot area (physical): 0x0089C000 - 0x008DC000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-18-F3-59-D4-C3, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Reading :: TFTP Server.
Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .... 1720320 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029006
Primary instruction cache 16kb, linesize 16 bytes (2 ways)
Primary data cache 16kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (root@localhost.localdomain) (gcc version 3.2.3 with Broadcom modifications) #11 ?@ 8??14 21:01:06 CST 2006
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4704 rev 9 at 264 MHz
Calibrating delay loop... 263.78 BogoMIPS
Memory: 30492k/32768k available (1478k kernel code, 2276k reserved, 116k data, 64k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
NTFS driver v1.1.22 [Flags: R/O]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
MFR: 1 ID 7e
number of CFI chips: 1
Flash device: 0x800000 at 0x1c000000
Physically mapped flash: cramfs filesystem found at block 982
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "boot"
0x00040000-0x007f0000 : "linux"
0x000f5964-0x007f0000 : "rootfs"
0x007f0000-0x00800000 : "nvram"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (256 buckets, 2048 max) - 344 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
Algorithmics/MIPS FPU Emulator v1.5
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.80.17.0
eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.80.17.0
PCI: Enabling device 01:02.0 (0004 -> 0006)
eth2: Broadcom BCM4329 802.11 Wireless Controller 4.80.17.0
device eth0 entered promiscuous mode
device eth2 entered promiscuous mode
eth3: No such device
eth4: No such device
br0: port 2(eth2) entering listening state
br0: port 1(eth0) entering listening state
br0: port 2(eth2) entering learning state
br0: port 1(eth0) entering learning state
br0: port 2(eth2) entering forwarding state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
br0: topology change detected, propagating
info, udhcp server (v0.9.8) started
No interface specified. Quitting...
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
usb-ohci.c: usb-00:03.0, PCI device 14e4:4715
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Enabling device 01:03.0 (0000 -> 0001)
uhci.c: USB UHCI at I/O 0x100, IRQ 12
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:03.1 (0000 -> 0001)
uhci.c: USB UHCI at I/O 0x120, IRQ 12
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:03.2 (0000 -> 0002)
ehci_hcd 01:03.2: PCI device 1106:3104
ehci_hcd 01:03.2: irq 12, pci mem c0100000
usb.c: new USB bus registered, assigned bus number 4
ECHI PCI device 31041106 found.
ECHI reg 0x49 = 80010f20
ECHI reg 0x49 changed to = 80010f00
ECHI reg 0x4b = 80010f09
ECHI reg 0x4b changed to = 80010f29
PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
Linux video capture interface: v1.00
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
No interface specified. Quitting...
PCI devices found:
Class 0501: PCI device 14e4:0800 (rev 9).
Class 0200: PCI device 14e4:4713 (rev 9).
Class 0200: PCI device 14e4:4713 (rev 9).
Class 0c03: PCI device 14e4:4715 (rev 9).
Class 0604: PCI device 14e4:0804 (rev 9).
Class 0b30: PCI device 14e4:0816 (rev 9).
Class 0703: PCI device 14e4:4712 (rev 9).
Class 1000: PCI device 14e4:4718 (rev 9).
Class 0500: PCI device 14e4:080f (rev 9).
Class 0600: PCI device 14e4:4704 (rev 9).
Class 0280: PCI device 14e4:4329 (rev 1).
Class 0c03: PCI device 1106:3038 (rev 97).
Class 0c03: PCI device 1106:3038 (rev 97).
Class 0c03: PCI device 1106:3104 (rev 99).
echo for PaN ::: &&&PaN
BusyBox v0.60.0 (2006.08.14-12:43+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
#
# lsmod
Module Size Used by
usb-storage 66464 0 (unused)
sd_mod 13072 0 (unused)
scsi_mod 69968 1 [usb-storage sd_mod]
videodev 5712 0 (unused)
audio 49824 0 (unused)
soundcore 5056 0 [audio]
printer 11712 0 (unused)
ehci-hcd 23632 0 (unused)
uhci 31488 0 (unused)
usb-ohci 21696 0 (unused)
usbcore 77680 0 [usb-storage audio printer ehci-hcd uhci usb-ohci]
nls_utf8 752 0 (unused)
nls_big5 416 0 (unused)
nls_cp950 98336 1
wl 567808 0 (unused)
et 26576 0 (unused)
ip_nat_ftp 3680 0 (unused)
ip_conntrack_ftp 4944 1
ipt_NETMAP 768 2
ip_nat_starcraft 1984 0 (unused)
#Sooner or later, I'll install openwrt with kmod-mimo from kamikaze build-root into it.
Please request outputs of original firmware you want while I can.
regards,
CPU type 0x29006: 264MHz Total memory: 33554432 KBytes
That's serious - a wireless router with 32GB of RAM!!
Memory: 30492k/32768k available (1478k kernel code, 2276k reserved, 116k data, 64k init, 0k highmem)
Aww, the kernel can only see the first 32MB of it 
Good evening, all.
I installed kamikaze to wl-500w.
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ?G 6??13 16:25:32 CST 2006 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
CPU type 0x29006: 264MHz
Total memory: 33554432 KBytes
Total memory used by CFE: 0x80800000 - 0x8089B600 (636416)
Initialized Data: 0x80831770 - 0x80833E50 (9952)
BSS Area: 0x80833E50 - 0x80835600 (6064)
Local Heap: 0x80835600 - 0x80899600 (409600)
Stack Area: 0x80899600 - 0x8089B600 (8192)
Text (code) segment: 0x80800000 - 0x80831770 (202608)
Boot area (physical): 0x0089C000 - 0x008DC000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-18-F3-59-D4-C3, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Reading :: TFTP Server.
Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3732 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029006
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Linux version 2.4.33.4 (owrt@localhost) (gcc version 3.4.6 (OpenWrt-2.0)) #5 Thu Dec 28 06:38:59 JST 2006
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM4704 rev 9 at 264 MHz
Using 132.000 MHz high precision timer.
Calibrating delay loop... 262.96 BogoMIPS
Memory: 30420k/32768k available (1464k kernel code, 2348k reserved, 100k data, 92k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Registering mini_fo version $Id$
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
b44.c:v0.93 (Mar, 2004)
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:18:f3:59:d4:c3
eth1: Broadcom 47xx 10/100BaseT Ethernet 00:90:4c:a1:00:2d
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x800000 at 0x1c000000
bootloader size: 262144
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007f0000 : "linux"
0x000c0000-0x007f0000 : "rootfs"
0x007f0000-0x00800000 : "nvram"
sflash: found no supported devices
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (jffs2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 92k freed
Algorithmics/MIPS FPU Emulator v1.5
diag: Detected 'ASUS WL-500g Deluxe'
Probing device eth0: found!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
Unlocking linux ...
init started: BusyBox v1.2.1 (2006.12.27-15:54+0000) multi-call binary
Please press Enter to activate this console. jffs2.bbc: SIZE compression mode activated.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering learning state
br-lan: port 1(eth0) entering forwarding state
br-lan: topology change detected, propagating
br-lan: port 1(eth0) entering disabled state
br-lan: port 1(eth0) entering learning state
br-lan: port 1(eth0) entering forwarding state
br-lan: topology change detected, propagating
b44: eth1: Link is up at 100 Mbps, full duplex.
b44: eth1: Flow control is off for TX and off for RX.
BFL_ENETADM not set in boardflags. Use force=1 to ignore.
PCI: Enabling device 01:02.0 (0004 -> 0006)
wl0: Broadcom BCM4329 802.11 Wireless Controller 4.80.53.0
device wl0 entered promiscuous mode
wl0: attempt to add interface with same source address.
br-lan: port 2(wl0) entering learning state
br-lan: port 2(wl0) entering forwarding state
br-lan: topology change detected, propagating
br-lan: port 2(wl0) entering disabled state
br-lan: port 2(wl0) entering disabled state
device wl0 left promiscuous mode
device wl0 entered promiscuous mode
wl0: attempt to add interface with same source address.
br-lan: port 2(wl0) entering learning state
br-lan: port 2(wl0) entering forwarding state
br-lan: topology change detected, propagating
BusyBox v1.2.1 (2006.12.27-15:54+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
KAMIKAZE (bleeding edge, r5903) -------------------
* 10 oz Vodka Shake well with ice and strain
* 10 oz Triple sec mixture into 10 shot glasses.
* 10 oz lime juice Salute!
---------------------------------------------------
root@OpenWrt:/#
root@OpenWrt:/# ifconfig
br-lan Link encap:Ethernet HWaddr 00:18:F3:59:D4:C3
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:18:F3:59:D4:C3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:5235 (5.1 KiB)
Interrupt:4
eth1 Link encap:Ethernet HWaddr 00:90:4C:A1:00:2D
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:5
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:72 errors:0 dropped:0 overruns:0 frame:0
TX packets:72 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4626 (4.5 KiB) TX bytes:4626 (4.5 KiB)
wl0 Link encap:Ethernet HWaddr 00:18:F3:59:D4:C3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:155
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:2 Base address:0x4000
root@OpenWrt:/# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
br-lan no wireless extensions.
wl0 IEEE 802.11-DS ESSID:"OpenWrt"
Mode:Master Frequency:2.412 GHz Access Point: 00:18:F3:59:D4:C3
Tx-Power:19 dBm
Link Noise level:-92 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
root@OpenWrt:/# lsmod
Module Size Used by Tainted: P
ip_conntrack_tftp 1712 0 (unused)
ip_nat_irc 2336 0 (unused)
ip_conntrack_irc 3128 1
ip_nat_ftp 2960 0 (unused)
ip_conntrack_ftp 4320 1
wlcompat 15520 0 (unused)
wl_mimo 710464 0 (unused)
switch-robo 4620 0 (unused)
switch-core 4832 0 [switch-robo]
diag 21056 0 (unused)
root@OpenWrt:/#this is my .config.
#
# Automatically generated make config: don't edit
# OpenWrt version: Kamikaze
# Thu Dec 28 06:38:38 2006
#
CONFIG_HAVE_DOT_CONFIG=y
# CONFIG_LINUX_2_6_AU1000 is not set
# CONFIG_LINUX_2_6_ARUBA is not set
# CONFIG_LINUX_2_6_ATHEROS is not set
CONFIG_LINUX_2_4_BRCM=y
# CONFIG_LINUX_2_6_BRCM is not set
# CONFIG_LINUX_2_6_BRCM63XX is not set
# CONFIG_LINUX_2_6_IXP4XX is not set
# CONFIG_LINUX_2_6_MAGICBOX is not set
# CONFIG_LINUX_2_6_RB532 is not set
# CONFIG_LINUX_2_6_RDC is not set
# CONFIG_LINUX_2_6_SIBYTE is not set
# CONFIG_LINUX_2_4_AR7 is not set
# CONFIG_LINUX_2_6_UML is not set
# CONFIG_LINUX_2_6_X86 is not set
# CONFIG_LINUX_2_6_ARM is not set
# CONFIG_LINUX_2_6_CRIS is not set
# CONFIG_LINUX_2_6_M68K is not set
# CONFIG_LINUX_2_6_SH3 is not set
# CONFIG_LINUX_2_6_SH3EB is not set
# CONFIG_LINUX_2_6_SH4 is not set
# CONFIG_LINUX_2_6_SH4EB is not set
# CONFIG_LINUX_2_6_SPARC is not set
# CONFIG_LINUX_2_6_AU1000_Atheros is not set
# CONFIG_LINUX_2_6_AU1000_Intel is not set
# CONFIG_LINUX_2_6_AU1000_Broadcom is not set
# CONFIG_LINUX_2_6_ARUBA_Default is not set
# CONFIG_LINUX_2_6_ATHEROS_Default is not set
# CONFIG_LINUX_2_4_BRCM_Broadcom is not set
# CONFIG_LINUX_2_4_BRCM_BroadcomMimo is not set
# CONFIG_LINUX_2_4_BRCM_Atheros is not set
# CONFIG_LINUX_2_4_BRCM_None is not set
# CONFIG_LINUX_2_4_BRCM_WRT54G3G is not set
# CONFIG_LINUX_2_4_BRCM_WL500G is not set
# CONFIG_LINUX_2_4_BRCM_WL500GD is not set
CONFIG_LINUX_2_4_BRCM_WL500GP=y
# CONFIG_LINUX_2_4_BRCM_WLHDD is not set
# CONFIG_LINUX_2_6_BRCM_Atheros is not set
# CONFIG_LINUX_2_6_BRCM_None is not set
# CONFIG_LINUX_2_6_BRCM63XX_Broadcom is not set
# CONFIG_LINUX_2_6_BRCM63XX_Atheros is not set
# CONFIG_LINUX_2_6_BRCM63XX_Ralink is not set
# CONFIG_LINUX_2_6_IXP4XX_Default is not set
# CONFIG_LINUX_2_6_MAGICBOX_Default is not set
# CONFIG_LINUX_2_6_RB532_Default is not set
# CONFIG_LINUX_2_6_RDC_Ralink is not set
# CONFIG_LINUX_2_6_SIBYTE_Default is not set
# CONFIG_LINUX_2_4_AR7_AnnexA is not set
# CONFIG_LINUX_2_4_AR7_AnnexB is not set
# CONFIG_LINUX_2_4_AR7_None is not set
# CONFIG_LINUX_2_6_UML_Default is not set
# CONFIG_LINUX_2_6_X86_Default is not set
CONFIG_LINUX_2_4=y
CONFIG_PCI_SUPPORT=y
CONFIG_PCMCIA_SUPPORT=y
CONFIG_USB_SUPPORT=y
CONFIG_USES_SQUASHFS=y
CONFIG_mipsel=y
CONFIG_ARCH="mipsel"
# CONFIG_ALL is not set
# CONFIG_DEVEL is not set
# CONFIG_BROKEN is not set
CONFIG_AUTOREBUILD=y
# CONFIG_TAR_VERBOSITY is not set
CONFIG_JLEVEL=1
# CONFIG_CCACHE is not set
# CONFIG_NATIVE_TOOLCHAIN is not set
CONFIG_BINUTILS_VERSION="2.16.1"
CONFIG_EXTRA_GCC_CONFIG_OPTIONS=""
CONFIG_INSTALL_LIBSTDCPP=y
# CONFIG_GDB is not set
CONFIG_LARGEFILE=y
# CONFIG_C99_MATH is not set
CONFIG_TARGET_OPTIMIZATION="-Os -pipe -mips32 -mtune=mips32 -funit-at-a-time"
CONFIG_GCC_VERSION="3.4.6"
# CONFIG_SDK is not set
#
# Target Images
#
CONFIG_TARGET_ROOTFS_JFFS2=y
CONFIG_TARGET_ROOTFS_SQUASHFS=y
# CONFIG_TARGET_ROOTFS_TGZ is not set
# CONFIG_TARGET_ROOTFS_EXT2FS is not set
#
# Image Options
#
CONFIG_X86_GRUB_ROOTPART="/dev/hda2"
CONFIG_X86_GRUB_BOOTOPTS=""
#
# Base system
#
CONFIG_DEFAULT_base-files=y
CONFIG_DEFAULT_libgcc=y
CONFIG_DEFAULT_uclibc=y
CONFIG_DEFAULT_bridge=y
CONFIG_DEFAULT_busybox=y
CONFIG_DEFAULT_dnsmasq=y
CONFIG_DEFAULT_dropbear=y
CONFIG_DEFAULT_iptables=y
CONFIG_DEFAULT_mtd=y
CONFIG_PACKAGE_base-files=y
CONFIG_PACKAGE_bridge=y
CONFIG_PACKAGE_busybox=y
#
# Configuration
#
CONFIG_BUSYBOX_HAVE_DOT_CONFIG=y
#
# Busybox Settings
#
#
# General Configuration
#
# CONFIG_BUSYBOX_CONFIG_NITPICK is not set
CONFIG_BUSYBOX_CONFIG_SHOW_USAGE=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VERBOSE_USAGE=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_INSTALLER is not set
# CONFIG_BUSYBOX_CONFIG_LOCALE_SUPPORT is not set
CONFIG_BUSYBOX_CONFIG_GETOPT_LONG=y
CONFIG_BUSYBOX_CONFIG_FEATURE_DEVPTS=y
CONFIG_BUSYBOX_CONFIG_FEATURE_SUID=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_SUID_CONFIG is not set
# CONFIG_BUSYBOX_CONFIG_SELINUX is not set
CONFIG_BUSYBOX_CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
#
# Build Options
#
# CONFIG_BUSYBOX_CONFIG_STATIC is not set
# CONFIG_BUSYBOX_CONFIG_BUILD_LIBBUSYBOX is not set
CONFIG_BUSYBOX_CONFIG_LFS=y
CONFIG_BUSYBOX_USING_CROSS_COMPILER=y
CONFIG_BUSYBOX_CROSS_COMPILER_PREFIX="mipsel-uclibc-"
# CONFIG_BUSYBOX_CONFIG_BUILD_AT_ONCE is not set
#
# Debugging Options
#
# CONFIG_BUSYBOX_CONFIG_DEBUG is not set
CONFIG_BUSYBOX_CONFIG_DEBUG_YANK_SUSv2=y
#
# Installation Options
#
# CONFIG_BUSYBOX_CONFIG_INSTALL_NO_USR is not set
CONFIG_BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS=y
# CONFIG_BUSYBOX_CONFIG_INSTALL_APPLET_HARDLINKS is not set
# CONFIG_BUSYBOX_CONFIG_INSTALL_APPLET_DONT is not set
CONFIG_BUSYBOX_PREFIX="./_install"
#
# Busybox Library Tuning
#
CONFIG_BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED=2
#
# Applets
#
#
# Archival Utilities
#
# CONFIG_BUSYBOX_CONFIG_AR is not set
CONFIG_BUSYBOX_CONFIG_BUNZIP2=y
# CONFIG_BUSYBOX_CONFIG_CPIO is not set
# CONFIG_BUSYBOX_CONFIG_DPKG is not set
# CONFIG_BUSYBOX_CONFIG_DPKG_DEB is not set
CONFIG_BUSYBOX_CONFIG_GUNZIP=y
CONFIG_BUSYBOX_CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
CONFIG_BUSYBOX_CONFIG_GZIP=y
CONFIG_BUSYBOX_CONFIG_IPKG=y
# CONFIG_BUSYBOX_CONFIG_RPM2CPIO is not set
# CONFIG_BUSYBOX_CONFIG_RPM is not set
CONFIG_BUSYBOX_CONFIG_TAR=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_CREATE=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_BZIP2=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_LZMA is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_FROM=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_GZIP=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_COMPRESS is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
# CONFIG_BUSYBOX_CONFIG_UNCOMPRESS is not set
# CONFIG_BUSYBOX_CONFIG_UNLZMA is not set
# CONFIG_BUSYBOX_CONFIG_UNZIP is not set
#
# Common options for cpio and tar
#
# CONFIG_BUSYBOX_CONFIG_FEATURE_UNARCHIVE_TAPE is not set
#
# Coreutils
#
CONFIG_BUSYBOX_CONFIG_BASENAME=y
# CONFIG_BUSYBOX_CONFIG_CAL is not set
CONFIG_BUSYBOX_CONFIG_CAT=y
# CONFIG_BUSYBOX_CONFIG_CATV is not set
CONFIG_BUSYBOX_CONFIG_CHGRP=y
CONFIG_BUSYBOX_CONFIG_CHMOD=y
CONFIG_BUSYBOX_CONFIG_CHOWN=y
CONFIG_BUSYBOX_CONFIG_CHROOT=y
# CONFIG_BUSYBOX_CONFIG_CKSUM is not set
# CONFIG_BUSYBOX_CONFIG_CMP is not set
# CONFIG_BUSYBOX_CONFIG_COMM is not set
CONFIG_BUSYBOX_CONFIG_CP=y
CONFIG_BUSYBOX_CONFIG_CUT=y
CONFIG_BUSYBOX_CONFIG_DATE=y
CONFIG_BUSYBOX_CONFIG_FEATURE_DATE_ISOFMT=y
CONFIG_BUSYBOX_CONFIG_DD=y
CONFIG_BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS is not set
CONFIG_BUSYBOX_CONFIG_DF=y
# CONFIG_BUSYBOX_CONFIG_DIFF is not set
CONFIG_BUSYBOX_CONFIG_DIRNAME=y
# CONFIG_BUSYBOX_CONFIG_DOS2UNIX is not set
CONFIG_BUSYBOX_CONFIG_DU=y
CONFIG_BUSYBOX_CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
CONFIG_BUSYBOX_CONFIG_ECHO=y
CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_ECHO=y
CONFIG_BUSYBOX_CONFIG_ENV=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_ENV_LONG_OPTIONS is not set
CONFIG_BUSYBOX_CONFIG_EXPR=y
# CONFIG_BUSYBOX_CONFIG_EXPR_MATH_SUPPORT_64 is not set
CONFIG_BUSYBOX_CONFIG_FALSE=y
# CONFIG_BUSYBOX_CONFIG_FOLD is not set
CONFIG_BUSYBOX_CONFIG_HEAD=y
CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_HEAD=y
CONFIG_BUSYBOX_CONFIG_HOSTID=y
CONFIG_BUSYBOX_CONFIG_ID=y
# CONFIG_BUSYBOX_CONFIG_INSTALL is not set
CONFIG_BUSYBOX_CONFIG_LENGTH=y
CONFIG_BUSYBOX_CONFIG_LN=y
# CONFIG_BUSYBOX_CONFIG_LOGNAME is not set
CONFIG_BUSYBOX_CONFIG_LS=y
CONFIG_BUSYBOX_CONFIG_FEATURE_LS_FILETYPES=y
CONFIG_BUSYBOX_CONFIG_FEATURE_LS_FOLLOWLINKS=y
CONFIG_BUSYBOX_CONFIG_FEATURE_LS_RECURSIVE=y
CONFIG_BUSYBOX_CONFIG_FEATURE_LS_SORTFILES=y
CONFIG_BUSYBOX_CONFIG_FEATURE_LS_TIMESTAMPS=y
CONFIG_BUSYBOX_CONFIG_FEATURE_LS_USERNAME=y
CONFIG_BUSYBOX_CONFIG_FEATURE_LS_COLOR=y
CONFIG_BUSYBOX_CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
CONFIG_BUSYBOX_CONFIG_MD5SUM=y
CONFIG_BUSYBOX_CONFIG_MKDIR=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_MKDIR_LONG_OPTIONS is not set
CONFIG_BUSYBOX_CONFIG_MKFIFO=y
CONFIG_BUSYBOX_CONFIG_MKNOD=y
CONFIG_BUSYBOX_CONFIG_MV=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_MV_LONG_OPTIONS is not set
# CONFIG_BUSYBOX_CONFIG_NICE is not set
# CONFIG_BUSYBOX_CONFIG_NOHUP is not set
# CONFIG_BUSYBOX_CONFIG_OD is not set
# CONFIG_BUSYBOX_CONFIG_PRINTENV is not set
CONFIG_BUSYBOX_CONFIG_PRINTF=y
CONFIG_BUSYBOX_CONFIG_PWD=y
# CONFIG_BUSYBOX_CONFIG_REALPATH is not set
CONFIG_BUSYBOX_CONFIG_RM=y
CONFIG_BUSYBOX_CONFIG_RMDIR=y
CONFIG_BUSYBOX_CONFIG_SEQ=y
# CONFIG_BUSYBOX_CONFIG_SHA1SUM is not set
CONFIG_BUSYBOX_CONFIG_SLEEP=y
CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP=y
CONFIG_BUSYBOX_CONFIG_SORT=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_SORT_BIG is not set
# CONFIG_BUSYBOX_CONFIG_STAT is not set
# CONFIG_BUSYBOX_CONFIG_STTY is not set
# CONFIG_BUSYBOX_CONFIG_SUM is not set
CONFIG_BUSYBOX_CONFIG_SYNC=y
CONFIG_BUSYBOX_CONFIG_TAIL=y
CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_TAIL=y
CONFIG_BUSYBOX_CONFIG_TEE=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
CONFIG_BUSYBOX_CONFIG_TEST=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_TEST_64 is not set
CONFIG_BUSYBOX_CONFIG_TOUCH=y
CONFIG_BUSYBOX_CONFIG_TR=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_TR_CLASSES is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_TR_EQUIV is not set
CONFIG_BUSYBOX_CONFIG_TRUE=y
# CONFIG_BUSYBOX_CONFIG_TTY is not set
CONFIG_BUSYBOX_CONFIG_UNAME=y
CONFIG_BUSYBOX_CONFIG_UNIQ=y
# CONFIG_BUSYBOX_CONFIG_USLEEP is not set
# CONFIG_BUSYBOX_CONFIG_UUDECODE is not set
# CONFIG_BUSYBOX_CONFIG_UUENCODE is not set
# CONFIG_BUSYBOX_CONFIG_WATCH is not set
CONFIG_BUSYBOX_CONFIG_WC=y
# CONFIG_BUSYBOX_CONFIG_WHO is not set
# CONFIG_BUSYBOX_CONFIG_WHOAMI is not set
CONFIG_BUSYBOX_CONFIG_YES=y
#
# Common options for cp and mv
#
CONFIG_BUSYBOX_CONFIG_FEATURE_PRESERVE_HARDLINKS=y
#
# Common options for ls, more and telnet
#
CONFIG_BUSYBOX_CONFIG_FEATURE_AUTOWIDTH=y
#
# Common options for df, du, ls
#
CONFIG_BUSYBOX_CONFIG_FEATURE_HUMAN_READABLE=y
#
# Common options for md5sum, sha1sum
#
CONFIG_BUSYBOX_CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
#
# Console Utilities
#
# CONFIG_BUSYBOX_CONFIG_CHVT is not set
CONFIG_BUSYBOX_CONFIG_CLEAR=y
# CONFIG_BUSYBOX_CONFIG_DEALLOCVT is not set
# CONFIG_BUSYBOX_CONFIG_DUMPKMAP is not set
# CONFIG_BUSYBOX_CONFIG_LOADFONT is not set
# CONFIG_BUSYBOX_CONFIG_LOADKMAP is not set
# CONFIG_BUSYBOX_CONFIG_OPENVT is not set
CONFIG_BUSYBOX_CONFIG_RESET=y
# CONFIG_BUSYBOX_CONFIG_SETCONSOLE is not set
# CONFIG_BUSYBOX_CONFIG_SETKEYCODES is not set
# CONFIG_BUSYBOX_CONFIG_SETLOGCONS is not set
#
# Debian Utilities
#
CONFIG_BUSYBOX_CONFIG_MKTEMP=y
# CONFIG_BUSYBOX_CONFIG_PIPE_PROGRESS is not set
# CONFIG_BUSYBOX_CONFIG_READLINK is not set
# CONFIG_BUSYBOX_CONFIG_RUN_PARTS is not set
# CONFIG_BUSYBOX_CONFIG_START_STOP_DAEMON is not set
CONFIG_BUSYBOX_CONFIG_WHICH=y
#
# Editors
#
CONFIG_BUSYBOX_CONFIG_AWK=y
CONFIG_BUSYBOX_CONFIG_FEATURE_AWK_MATH=y
# CONFIG_BUSYBOX_CONFIG_ED is not set
# CONFIG_BUSYBOX_CONFIG_PATCH is not set
CONFIG_BUSYBOX_CONFIG_SED=y
CONFIG_BUSYBOX_CONFIG_VI=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VI_COLON=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VI_YANKMARK=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VI_SEARCH=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VI_USE_SIGNALS=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VI_DOT_CMD=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VI_READONLY=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VI_SETOPTS=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VI_SET=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VI_WIN_RESIZE=y
CONFIG_BUSYBOX_CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
#
# Finding Utilities
#
CONFIG_BUSYBOX_CONFIG_FIND=y
CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_PRINT0=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_MTIME is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_MMIN is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_PERM=y
CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_TYPE=y
CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_XDEV=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_NEWER is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_INUM is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_EXEC=y
CONFIG_BUSYBOX_CONFIG_GREP=y
CONFIG_BUSYBOX_CONFIG_FEATURE_GREP_EGREP_ALIAS=y
CONFIG_BUSYBOX_CONFIG_FEATURE_GREP_FGREP_ALIAS=y
CONFIG_BUSYBOX_CONFIG_FEATURE_GREP_CONTEXT=y
CONFIG_BUSYBOX_CONFIG_XARGS=y
CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
#
# Init Utilities
#
CONFIG_BUSYBOX_CONFIG_INIT=y
# CONFIG_BUSYBOX_CONFIG_DEBUG_INIT is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_USE_INITTAB=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_INIT_SCTTY is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_EXTRA_QUIET is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_INIT_COREDUMPS is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_INITRD is not set
CONFIG_BUSYBOX_CONFIG_HALT=y
CONFIG_BUSYBOX_CONFIG_MESG=y
#
# Login/Password Management Utilities
#
# CONFIG_BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS is not set
# CONFIG_BUSYBOX_CONFIG_USE_BB_PWD_GRP is not set
# CONFIG_BUSYBOX_CONFIG_ADDGROUP is not set
# CONFIG_BUSYBOX_CONFIG_DELGROUP is not set
# CONFIG_BUSYBOX_CONFIG_ADDUSER is not set
# CONFIG_BUSYBOX_CONFIG_DELUSER is not set
# CONFIG_BUSYBOX_CONFIG_GETTY is not set
# CONFIG_BUSYBOX_CONFIG_LOGIN is not set
CONFIG_BUSYBOX_CONFIG_PASSWD=y
# CONFIG_BUSYBOX_CONFIG_SU is not set
# CONFIG_BUSYBOX_CONFIG_SULOGIN is not set
# CONFIG_BUSYBOX_CONFIG_VLOCK is not set
#
# Linux Ext2 FS Progs
#
# CONFIG_BUSYBOX_CONFIG_CHATTR is not set
# CONFIG_BUSYBOX_CONFIG_E2FSCK is not set
# CONFIG_BUSYBOX_CONFIG_FSCK is not set
# CONFIG_BUSYBOX_CONFIG_LSATTR is not set
# CONFIG_BUSYBOX_CONFIG_MKE2FS is not set
# CONFIG_BUSYBOX_CONFIG_TUNE2FS is not set
#
# Linux Module Utilities
#
CONFIG_BUSYBOX_CONFIG_INSMOD=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
CONFIG_BUSYBOX_CONFIG_RMMOD=y
CONFIG_BUSYBOX_CONFIG_LSMOD=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT is not set
# CONFIG_BUSYBOX_CONFIG_MODPROBE is not set
#
# Options common to multiple modutils
#
CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES=y
CONFIG_BUSYBOX_CONFIG_FEATURE_2_6_MODULES=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
#
# Linux System Utilities
#
CONFIG_BUSYBOX_CONFIG_DMESG=y
# CONFIG_BUSYBOX_CONFIG_FBSET is not set
# CONFIG_BUSYBOX_CONFIG_FDFLUSH is not set
# CONFIG_BUSYBOX_CONFIG_FDFORMAT is not set
# CONFIG_BUSYBOX_CONFIG_FDISK is not set
CONFIG_BUSYBOX_FDISK_SUPPORT_LARGE_DISKS=y
# CONFIG_BUSYBOX_CONFIG_FREERAMDISK is not set
# CONFIG_BUSYBOX_CONFIG_FSCK_MINIX is not set
# CONFIG_BUSYBOX_CONFIG_MKFS_MINIX is not set
# CONFIG_BUSYBOX_CONFIG_GETOPT is not set
CONFIG_BUSYBOX_CONFIG_HEXDUMP=y
# CONFIG_BUSYBOX_CONFIG_HWCLOCK is not set
# CONFIG_BUSYBOX_CONFIG_IPCRM is not set
# CONFIG_BUSYBOX_CONFIG_IPCS is not set
# CONFIG_BUSYBOX_CONFIG_LOSETUP is not set
# CONFIG_BUSYBOX_CONFIG_MDEV is not set
# CONFIG_BUSYBOX_CONFIG_MKSWAP is not set
# CONFIG_BUSYBOX_CONFIG_MORE is not set
CONFIG_BUSYBOX_CONFIG_MOUNT=y
CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_NFS=y
CONFIG_BUSYBOX_CONFIG_PIVOT_ROOT=y
CONFIG_BUSYBOX_CONFIG_RDATE=y
# CONFIG_BUSYBOX_CONFIG_READPROFILE is not set
# CONFIG_BUSYBOX_CONFIG_SETARCH is not set
# CONFIG_BUSYBOX_CONFIG_SWAPONOFF is not set
CONFIG_BUSYBOX_CONFIG_SWITCH_ROOT=y
CONFIG_BUSYBOX_CONFIG_UMOUNT=y
CONFIG_BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL=y
#
# Common options for mount/umount
#
CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT is not set
#
# Miscellaneous Utilities
#
# CONFIG_BUSYBOX_CONFIG_ADJTIMEX is not set
# CONFIG_BUSYBOX_CONFIG_BBCONFIG is not set
CONFIG_BUSYBOX_CONFIG_CROND=y
# CONFIG_BUSYBOX_CONFIG_DEBUG_CROND_OPTION is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
CONFIG_BUSYBOX_CONFIG_CRONTAB=y
# CONFIG_BUSYBOX_CONFIG_DC is not set
# CONFIG_BUSYBOX_CONFIG_DEVFSD is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_DEVFS=y
# CONFIG_BUSYBOX_CONFIG_EJECT is not set
# CONFIG_BUSYBOX_CONFIG_LAST is not set
CONFIG_BUSYBOX_CONFIG_LESS=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_FLAGS is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_FLAGCS is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_MARKS is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_REGEXP is not set
# CONFIG_BUSYBOX_CONFIG_HDPARM is not set
CONFIG_BUSYBOX_CONFIG_LOCK=y
# CONFIG_BUSYBOX_CONFIG_MAKEDEVS is not set
# CONFIG_BUSYBOX_CONFIG_MOUNTPOINT is not set
# CONFIG_BUSYBOX_CONFIG_MT is not set
# CONFIG_BUSYBOX_CONFIG_RUNLEVEL is not set
# CONFIG_BUSYBOX_CONFIG_RX is not set
CONFIG_BUSYBOX_CONFIG_STRINGS=y
# CONFIG_BUSYBOX_CONFIG_SETSID is not set
# CONFIG_BUSYBOX_CONFIG_TASKSET is not set
CONFIG_BUSYBOX_CONFIG_TIME=y
CONFIG_BUSYBOX_CONFIG_WATCHDOG=y
#
# Networking Utilities
#
CONFIG_BUSYBOX_CONFIG_FEATURE_IPV6=y
CONFIG_BUSYBOX_CONFIG_ARPING=y
# CONFIG_BUSYBOX_CONFIG_DNSD is not set
# CONFIG_BUSYBOX_CONFIG_ETHER_WAKE is not set
# CONFIG_BUSYBOX_CONFIG_FAKEIDENTD is not set
# CONFIG_BUSYBOX_CONFIG_FTPGET is not set
# CONFIG_BUSYBOX_CONFIG_FTPPUT is not set
# CONFIG_BUSYBOX_CONFIG_HOSTNAME is not set
CONFIG_BUSYBOX_CONFIG_HTTPD=y
CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_WITHOUT_INETD=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CGI=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
CONFIG_BUSYBOX_CONFIG_IFCONFIG=y
CONFIG_BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW=y
CONFIG_BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
# CONFIG_BUSYBOX_CONFIG_IFUPDOWN is not set
# CONFIG_BUSYBOX_CONFIG_INETD is not set
# CONFIG_BUSYBOX_CONFIG_IP is not set
# CONFIG_BUSYBOX_CONFIG_IPCALC is not set
# CONFIG_BUSYBOX_CONFIG_NAMEIF is not set
CONFIG_BUSYBOX_CONFIG_NC=y
CONFIG_BUSYBOX_CONFIG_NETMSG=y
# CONFIG_BUSYBOX_CONFIG_NC_GAPING_SECURITY_HOLE is not set
CONFIG_BUSYBOX_CONFIG_NETSTAT=y
CONFIG_BUSYBOX_CONFIG_NSLOOKUP=y
CONFIG_BUSYBOX_CONFIG_PING=y
CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_PING=y
CONFIG_BUSYBOX_CONFIG_PING6=y
CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_PING6=y
CONFIG_BUSYBOX_CONFIG_ROUTE=y
CONFIG_BUSYBOX_CONFIG_TELNET=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN is not set
CONFIG_BUSYBOX_CONFIG_TELNETD=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_TELNETD_INETD is not set
# CONFIG_BUSYBOX_CONFIG_TFTP is not set
CONFIG_BUSYBOX_CONFIG_TRACEROUTE=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
#
# udhcp Server/Client
#
# CONFIG_BUSYBOX_CONFIG_APP_UDHCPD is not set
CONFIG_BUSYBOX_CONFIG_APP_UDHCPC=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_SYSLOG is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_DEBUG is not set
CONFIG_BUSYBOX_CONFIG_VCONFIG=y
CONFIG_BUSYBOX_CONFIG_WGET=y
CONFIG_BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR=y
CONFIG_BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION=y
CONFIG_BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL=y
CONFIG_BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS=y
# CONFIG_BUSYBOX_CONFIG_ZCIP is not set
#
# Process Utilities
#
CONFIG_BUSYBOX_CONFIG_FREE=y
# CONFIG_BUSYBOX_CONFIG_FUSER is not set
CONFIG_BUSYBOX_CONFIG_KILL=y
CONFIG_BUSYBOX_CONFIG_KILLALL=y
CONFIG_BUSYBOX_CONFIG_KILLALL5=y
CONFIG_BUSYBOX_CONFIG_PIDOF=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_PIDOF_SINGLE is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_PIDOF_OMIT is not set
CONFIG_BUSYBOX_CONFIG_PS=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_PS_WIDE is not set
# CONFIG_BUSYBOX_CONFIG_RENICE is not set
CONFIG_BUSYBOX_CONFIG_BB_SYSCTL=y
CONFIG_BUSYBOX_CONFIG_TOP=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
CONFIG_BUSYBOX_CONFIG_UPTIME=y
#
# Shells
#
CONFIG_BUSYBOX_CONFIG_FEATURE_SH_IS_ASH=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_SH_IS_HUSH is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_SH_IS_LASH is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_SH_IS_MSH is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_SH_IS_NONE is not set
CONFIG_BUSYBOX_CONFIG_ASH=y
#
# Ash Shell Options
#
CONFIG_BUSYBOX_CONFIG_ASH_JOB_CONTROL=y
# CONFIG_BUSYBOX_CONFIG_ASH_READ_NCHARS is not set
CONFIG_BUSYBOX_CONFIG_ASH_READ_TIMEOUT=y
CONFIG_BUSYBOX_CONFIG_ASH_ALIAS=y
CONFIG_BUSYBOX_CONFIG_ASH_MATH_SUPPORT=y
# CONFIG_BUSYBOX_CONFIG_ASH_MATH_SUPPORT_64 is not set
CONFIG_BUSYBOX_CONFIG_ASH_GETOPTS=y
CONFIG_BUSYBOX_CONFIG_ASH_BUILTIN_ECHO=y
CONFIG_BUSYBOX_CONFIG_ASH_BUILTIN_TEST=y
CONFIG_BUSYBOX_CONFIG_ASH_CMDCMD=y
# CONFIG_BUSYBOX_CONFIG_ASH_MAIL is not set
CONFIG_BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
# CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT is not set
# CONFIG_BUSYBOX_CONFIG_ASH_EXPAND_PRMT is not set
# CONFIG_BUSYBOX_CONFIG_HUSH is not set
# CONFIG_BUSYBOX_CONFIG_LASH is not set
# CONFIG_BUSYBOX_CONFIG_MSH is not set
#
# Bourne Shell Options
#
# CONFIG_BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET is not set
# CONFIG_BUSYBOX_CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING_VI is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_COMMAND_HISTORY=15
# CONFIG_BUSYBOX_CONFIG_FEATURE_COMMAND_SAVEHISTORY is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_SH_FANCY_PROMPT=y
#
# System Logging Utilities
#
CONFIG_BUSYBOX_CONFIG_SYSLOGD=y
CONFIG_BUSYBOX_CONFIG_FEATURE_ROTATE_LOGFILE=y
CONFIG_BUSYBOX_CONFIG_FEATURE_REMOTE_LOG=y
CONFIG_BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG=y
CONFIG_BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
CONFIG_BUSYBOX_CONFIG_LOGREAD=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
CONFIG_BUSYBOX_CONFIG_KLOGD=y
CONFIG_BUSYBOX_CONFIG_LOGGER=y
CONFIG_PACKAGE_dnsmasq=y
CONFIG_PACKAGE_dropbear=y
CONFIG_PACKAGE_iptables=y
# CONFIG_PACKAGE_iptables-mod-conntrack is not set
# CONFIG_PACKAGE_iptables-mod-extra is not set
# CONFIG_PACKAGE_iptables-mod-filter is not set
# CONFIG_PACKAGE_iptables-mod-imq is not set
# CONFIG_PACKAGE_iptables-mod-ipopt is not set
# CONFIG_PACKAGE_iptables-mod-ipsec is not set
# CONFIG_PACKAGE_iptables-mod-nat is not set
# CONFIG_PACKAGE_iptables-mod-ulog is not set
# CONFIG_PACKAGE_iptables-utils is not set
CONFIG_PACKAGE_libgcc=y
CONFIG_PACKAGE_mtd=y
# CONFIG_PACKAGE_qos-scripts is not set
CONFIG_PACKAGE_uclibc=y
CONFIG_PACKAGE_wireless-tools=y
#
# Utilities
#
CONFIG_DEFAULT_nvram=y
# CONFIG_PACKAGE_comgt is not set
# CONFIG_PACKAGE_dropbearconvert is not set
# CONFIG_PACKAGE_fdisk is not set
# CONFIG_PACKAGE_haserl is not set
# CONFIG_PACKAGE_losetup is not set
CONFIG_PACKAGE_nvram=y
# CONFIG_PACKAGE_openssl-util is not set
# CONFIG_PACKAGE_pcmcia-cs is not set
# CONFIG_PACKAGE_robocfg is not set
# CONFIG_PACKAGE_swap-utils is not set
#
# Libraries
#
# CONFIG_PACKAGE_libgmp is not set
# CONFIG_PACKAGE_libopenssl is not set
# CONFIG_PACKAGE_libpcap is not set
# CONFIG_PACKAGE_libpthread is not set
# CONFIG_PACKAGE_linux-atm is not set
# CONFIG_PACKAGE_zlib is not set
#
# Network
#
CONFIG_DEFAULT_ppp=y
CONFIG_DEFAULT_ppp-mod-pppoe=y
# CONFIG_PACKAGE_arptables is not set
# CONFIG_PACKAGE_br2684ctl is not set
# CONFIG_PACKAGE_ebtables is not set
# CONFIG_PACKAGE_hostap-utils is not set
# CONFIG_PACKAGE_hostapd is not set
# CONFIG_PACKAGE_hostapd-mini is not set
# CONFIG_PACKAGE_ip is not set
# CONFIG_PACKAGE_ip6tables is not set
# CONFIG_PACKAGE_ipset is not set
# CONFIG_PACKAGE_openswan is not set
# CONFIG_PACKAGE_ppp is not set
# CONFIG_PACKAGE_pptp is not set
# CONFIG_PACKAGE_tc is not set
# CONFIG_PACKAGE_wpa-supplicant is not set
#
# Kernel modules
#
CONFIG_DEFAULT_kmod-usb-core=y
CONFIG_DEFAULT_kmod-usb-ohci=y
CONFIG_DEFAULT_kmod-usb2=y
#
# Filesystems
#
CONFIG_PACKAGE_kmod-fs-cifs=m
CONFIG_PACKAGE_kmod-fs-ext2=m
CONFIG_PACKAGE_kmod-fs-ext3=m
CONFIG_PACKAGE_kmod-fs-hfsplus=m
CONFIG_PACKAGE_kmod-fs-isofs=m
CONFIG_PACKAGE_kmod-fs-minix=m
CONFIG_PACKAGE_kmod-fs-msdos=m
CONFIG_PACKAGE_kmod-fs-nfs=m
CONFIG_PACKAGE_kmod-fs-udf=m
CONFIG_PACKAGE_kmod-fs-vfat=m
CONFIG_PACKAGE_kmod-fs-xfs=m
CONFIG_PACKAGE_kmod-nls-base=m
CONFIG_PACKAGE_kmod-nls-cp437=m
CONFIG_PACKAGE_kmod-nls-cp850=m
CONFIG_PACKAGE_kmod-nls-iso8859-1=m
CONFIG_PACKAGE_kmod-nls-iso8859-15=m
CONFIG_PACKAGE_kmod-nls-koi8r=m
CONFIG_PACKAGE_kmod-nls-utf8=m
#
# Netfilter Extensions
#
CONFIG_PACKAGE_kmod-arptables=m
CONFIG_PACKAGE_kmod-ebtables=m
CONFIG_PACKAGE_kmod-ip6tables=m
CONFIG_PACKAGE_kmod-ipt-conntrack=m
CONFIG_PACKAGE_kmod-ipt-extra=m
CONFIG_PACKAGE_kmod-ipt-filter=m
CONFIG_PACKAGE_kmod-ipt-imq=m
CONFIG_PACKAGE_kmod-ipt-ipopt=m
CONFIG_PACKAGE_kmod-ipt-ipsec=m
CONFIG_PACKAGE_kmod-ipt-nat=m
CONFIG_PACKAGE_kmod-ipt-nathelper=y
CONFIG_PACKAGE_kmod-ipt-nathelper-extra=m
CONFIG_PACKAGE_kmod-ipt-queue=m
CONFIG_PACKAGE_kmod-ipt-ulog=m
#
# Network Devices
#
#
# Network Support
#
CONFIG_PACKAGE_kmod-ax25=m
CONFIG_PACKAGE_kmod-gre=m
CONFIG_PACKAGE_kmod-ipip=m
CONFIG_PACKAGE_kmod-ipv6=m
CONFIG_PACKAGE_kmod-ppp=m
CONFIG_PACKAGE_kmod-mppe=m
CONFIG_PACKAGE_kmod-pppoa=m
CONFIG_PACKAGE_kmod-pppoe=m
CONFIG_PACKAGE_kmod-sched=m
CONFIG_PACKAGE_kmod-tun=m
#
# Other modules
#
CONFIG_PACKAGE_kmod-bluetooth=m
CONFIG_PACKAGE_kmod-crypto=m
CONFIG_PACKAGE_kmod-ide-core=m
CONFIG_PACKAGE_kmod-ide-pdc202xx=m
CONFIG_PACKAGE_kmod-loop=m
CONFIG_PACKAGE_kmod-lp=m
CONFIG_PACKAGE_kmod-nbd=m
# CONFIG_PACKAGE_kmod-nozomi is not set
CONFIG_PACKAGE_kmod-pcmcia-core=m
CONFIG_PACKAGE_kmod-pcmcia-serial=m
CONFIG_PACKAGE_kmod-softdog=m
CONFIG_PACKAGE_kmod-soundcore=m
CONFIG_PACKAGE_kmod-videodev=m
#
# USB Support
#
CONFIG_PACKAGE_kmod-usb-core=m
CONFIG_PACKAGE_kmod-usb-ohci=m
CONFIG_PACKAGE_kmod-usb-uhci=m
CONFIG_PACKAGE_kmod-usb2=m
CONFIG_PACKAGE_kmod-usb-acm=m
CONFIG_PACKAGE_kmod-usb-audio=m
CONFIG_PACKAGE_kmod-usb-printer=m
CONFIG_PACKAGE_kmod-usb-pwc=m
CONFIG_PACKAGE_kmod-usb-serial=m
CONFIG_PACKAGE_kmod-usb-serial-belkin=m
CONFIG_PACKAGE_kmod-usb-serial-ftdi=m
CONFIG_PACKAGE_kmod-usb-serial-mct=m
CONFIG_PACKAGE_kmod-usb-serial-pl2303=m
CONFIG_PACKAGE_kmod-usb-serial-visor=m
CONFIG_PACKAGE_kmod-usb-storage=m
#
# Wireless Drivers
#
CONFIG_PACKAGE_kmod-hostap=m
CONFIG_PACKAGE_kmod-hostap-pci=m
CONFIG_PACKAGE_kmod-hostap-plx=m
CONFIG_PACKAGE_kmod-ieee80211=m
CONFIG_PACKAGE_kmod-ieee80211-softmac=m
CONFIG_PACKAGE_kmod-madwifi=m
CONFIG_PACKAGE_kmod-net-airo=m
CONFIG_PACKAGE_kmod-net-bcm43xx=m
CONFIG_PACKAGE_kmod-net-hermes=m
CONFIG_PACKAGE_kmod-net-hermes-pci=m
CONFIG_PACKAGE_kmod-net-hermes-plx=m
CONFIG_PACKAGE_kmod-net-ipw2100=m
CONFIG_PACKAGE_kmod-net-ipw2200=m
CONFIG_PACKAGE_kmod-net-prism54=m
CONFIG_PACKAGE_kmod-rt2570=m
#
# Kernel drivers
#
CONFIG_DEFAULT_kmod-brcm-wl=y
CONFIG_DEFAULT_kmod-switch=y
#
# Proprietary BCM43xx WiFi driver
#
# CONFIG_PACKAGE_kmod-brcm-wl is not set
CONFIG_PACKAGE_kmod-brcm-wl-mimo=y
CONFIG_PACKAGE_nas=y
CONFIG_PACKAGE_wl=y
CONFIG_PACKAGE_wlc=y
# CONFIG_PACKAGE_kmod-alsa is not set
CONFIG_PACKAGE_kmod-diag=y
# CONFIG_PACKAGE_kmod-openswan is not set
CONFIG_PACKAGE_kmod-switch=y
CONFIG_PACKAGE_kmod-wlcompat=y
CONFIG_PACKAGE_kmod-wlcompat-debug=yI changed /etc/config/network. This is natural for wl-500w.
root@OpenWrt:/# cat /etc/config/network
#### VLAN configuration
#config switch eth0
# option vlan0 "1 2 3 4 5*"
# option vlan1 "0 5"
#### Loopback configuration
config interface loopback
option ifname "lo"
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
#### LAN configuration
config interface lan
option type bridge
# option ifname "eth0.0"
option ifname "eth0 wl0"
option proto static
option ipaddr 192.168.1.1
option netmask 255.255.255.0
#### WAN configuration
config interface wan
# option ifname "eth0.1"
option ifname "eth1"
# option proto dhcp
option proto static
option ipaddr 192.168.0.1
option netmask 255.255.255.0
root@OpenWrt:/#One problem: Just after intalling and rebooting, All leds were keeping on lighting. This prevented ethernet port from linking. After "echo 0 > /proc/diag/led/power", ethernet ports linked and leds became normal. So I had to change /etc/diag.sh
root@OpenWrt:/# cat /etc/diag.sh
#!/bin/sh
# Copyright (C) 2006 OpenWrt.org
set_led() {
local led="$1"
local state="$2"
[ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1"
}
set_state() {
case "$1" in
preinit)
set_led dmz 1
set_led diag 1
set_led power 0
;;
failsafe)
set_led diag f
set_led power f
set_led dmz f
;;
done)
set_led dmz 0
set_led diag 0
# set_led power 1
set_led power 0
;;
esac
}
root@OpenWrt:/#At last, It's regretted to find that wireless module doesn't work as 802.11n draft mode.
root@OpenWrt:/# wl|grep nrate
abminrate
nrate -r legacy rate (CCK, OFDM)-m mcs index-s stf mode (0=SISO,1=CDD,2=STBC(not supported),3=SDM)
root@OpenWrt:/# wl nrate
legacy rate 54 Mbps stf mode 0 auto
root@OpenWrt:/# wl nrate -m 0
wl: Not In Range
root@OpenWrt:/# wl nrate -m 1
wl: Not In Range
root@OpenWrt:/# wl nrate -m 2
wl: Not In Range
root@OpenWrt:/# wl nrate -m 3
wl: Not In Range
root@OpenWrt:/#And my pcmcia draftN card(buffalo) also shows it works only 802.11g mode. It let me down....
Does anybody have any idea or indication to make it work as draft N mode?
Thank you.
Hello. I have wl 500w. How could install kamikaze or openwrt on it? Thanks.
Please put the output of nvram show and figure out the gpio connections with the gpio utility (http://forum.openwrt.org/viewtopic.php?id=7839)
I am just curious why in this OpenWRT comunity no body want to tell the other how to do the things.
Please people. I you did something and someone else asks how that was done, please help other do what already was done. This is the purpose of any forum.
Probably because OpenWrt kamikaze is (a) for developers only, not end-users; (b) not supported; (c) in a constant state of change; (d) liable to brick your router.
Notice also that the name of this forum is "Developers Only". Detailled instructions were posted above about how to modify Kamikaze work for this unit. If you're a developer those instructions will be sufficient. If they don't mean enough to you, then you shouldn't be trying Kamikaze.
I hope Kamikaze becomes stable (and recommended) soon, because at the moment OpenWrt is in no-man's-land: WhiteRussian will get no further development, and yet Kamikaze is not recommended for use. But in the mean time, it has been said over and over again: do NOT use Kamikaze unless you know what you're doing, and you know how to unbrick your router.
There is an interesting story about the WL-500W at http://www.golem.de/0703/50822.html (sorry this is only german).
I'll try to translate:
If the WL-500W and two other Asus-products cannot be adapted to the final 802.11n standard via software, then Asus will exchange the devices for free. :-)
Hi all,
I've tested different firms on the 500W... And now when I installed openwrt I seem to get dome kind memoy mapping problem:
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007f0000 : "linux"
0x000be400-0x001c0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007f0000-0x00800000 : "nvram"
0x001c0000-0x007f0000 : "OpenWrt"
-What's wrong, and how do I correct the mapping ?
Thanks, Mikael
What are the chances of running 2.6 kernel/openwrt-brcm47xx-2.6 on Asus WL500W?
Any insights would be greatly appreciated.
Hi, mr007.
O.K. I've installed this
http://downloads.openwrt.org/snapshots/ … uashfs.trx
in my wl500w.
It works good, except for wireless.
root@OpenWrt:/# uname -a
Linux OpenWrt 2.6.19.2 #1 Tue May 1 07:58:16 BST 2007 mips unknown
root@OpenWrt:/# ifconfig
br-lan Link encap:Ethernet HWaddr 00:18:F3:59:D4:C3
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1376 errors:0 dropped:0 overruns:0 frame:0
TX packets:1635 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:113137 (110.4 KiB) TX bytes:437119 (426.8 KiB)
eth0 Link encap:Ethernet HWaddr 00:18:F3:59:D4:C3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3030 errors:0 dropped:0 overruns:0 frame:0
TX packets:2911 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:596252 (582.2 KiB) TX bytes:576684 (563.1 KiB)
Interrupt:4
eth0.0 Link encap:Ethernet HWaddr 00:18:F3:59:D4:C3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1376 errors:0 dropped:0 overruns:0 frame:0
TX packets:1635 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:118641 (115.8 KiB) TX bytes:443659 (433.2 KiB)
eth0.1 Link encap:Ethernet HWaddr 00:18:F3:59:D4:C3
inet addr:192.168.11.3 Bcast:192.168.11.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1636 errors:0 dropped:0 overruns:0 frame:0
TX packets:1276 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:421330 (411.4 KiB) TX bytes:117768 (115.0 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@OpenWrt:/# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
eth0.0 no wireless extensions.
br-lan no wireless extensions.
eth0.1 no wireless extensions.
root@OpenWrt:/# lsmod
Module Size Used by Tainted: P
ath_pci 68320 0
wlan_xauth 480 0
wlan_wep 4320 0
wlan_tkip 9984 0
wlan_ccmp 5856 0
wlan_acl 2208 0
ath_rate_sample 8000 1 ath_pci
ath_hal 222016 2 ath_pci,ath_rate_sample
wlan_scan_sta 8224 0
wlan_scan_ap 2720 0
wlan 135520 9 ath_pci,wlan_xauth,wlan_wep,wlan_tkip,wlan_ccmp,wlan_acl,ath_rate_sample,wlan_scan_sta,wlan_scan_ap
ip_conntrack_tftp 1680 0
ip_nat_irc 960 0
ip_conntrack_irc 2832 1 ip_nat_irc
ip_nat_ftp 1696 0
ip_conntrack_ftp 4016 1 ip_nat_ftp
ppp_async 9504 0
ppp_generic 20480 1 ppp_async
slhc 5472 1 ppp_generic
crc_ccitt 1024 1 ppp_async
switch_robo 4048 0
switch_core 5088 1 switch_robo
diag 7696 0
root@OpenWrt:/#I hope this would help you.
regards,
zukky
Hi yapoo,
This is great news. Thanks for the update and pointer.
I tried to install the .trx you suggested, however I'm getting garbage on the console.
Are the serial console parameters different than those of the CFE bootloader (115200 8N1)?
Would it be too much to ask you for the output of your "nvram show | sort" ?
Also - I understand it was compiled from the May 1 version of kamikaze or did you have additional patches?
Which profile was used (Atheros Wi-Fi, No Wi-Fi, Netgear WGT634U)?
Please let me know exactly which revision did you use and send/post the extra patches, if there are any.
Thanks a lot,
007
(Last edited by mr007 on 3 May 2007, 13:27)
Hi, 007.
I'm sorry to be late.
Are the serial console parameters different than those of the CFE bootloader (115200 8N1)?
007
14400 8N1 on my console.
Would it be too much to ask you for the output of your "nvram show | sort" ?
007
?
There is not nvram on openwrt-brcm47xx-2.6....
Also - I understand it was compiled from the May 1 version of kamikaze or did you have additional patches?
Which profile was used (Atheros Wi-Fi, No Wi-Fi, Netgear WGT634U)?
Please let me know exactly which revision did you use and send/post the extra patches, if there are any.
007
I got the snapshot from download on openwrt site and installed as it is. No patches.
As to profile, maybe "Atheros Wi-Fi".
About revision,
BusyBox v1.4.1 (2007-05-01 07:19:48 BST) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
KAMIKAZE (bleeding edge, r7072) -------------------
* 10 oz Vodka Shake well with ice and strain
* 10 oz Triple sec mixture into 10 shot glasses.
* 10 oz lime juice Salute!
---------------------------------------------------
root@OpenWrt:/# nvram
/bin/ash: nvram: not found
root@OpenWrt:/# uname -a
Linux OpenWrt 2.6.19.2 #1 Tue May 1 07:58:16 BST 2007 mips unknownI wish this would help you.
Shall we move to other forum, "General Discussion" or "General Discussion(Kamikaze)"?
This kind of topic would be unfit for "Developers Only"......
regards,
zukky
Thanks a lot, zukky.
If you got administrative rights - feel free to move this the General (kamikaze).
Unfortunately, despite taking the very same steps and changing the console parameters accordingly (14400 8N1 - minicom and setserial) to match yours, I was not able to get a meaningful run of the 2.6 kernel on WL500W.
I keep getting the same garbaged output.
Spent a lot of time on this yesterday and today (thus the delayed reply), but no luck at this point.
I really need the 2.6 on WL500W and this is driving me nuts.
Thanks for the help,
007
(Last edited by mr007 on 7 May 2007, 17:50)
I´d like to ask you whether it´s possible to use Wlan as an ISP or not. That´s why I´m looking for another firmware. (WL 500W)
The discussion might have continued from here.