OpenWrt Forum Archive

Topic: Questions about vdsl_cpe_control

The content of this topic has been archived on 15 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

hello

i want to ask about the capabailities of vdsl_cpe_control in supported modems...

can i tweak snr?
can i switch to path 0 and disable g.inp and interleaving?
can i set a max rate for the connection?(like xdslcmd configure --maxrate)
what else can i do with the utility? i cant find documentation for it.

i want to improve my line quality with these, i tried lots of unsupported routers and the cli is locked or limited so i started to consider a openwrt modded vdsl router.

if anyone has a supported vdsl openwrt modded router/modem, it would be great to post all the xdsl options from the cli and gui if interested.

thanks

(Last edited by Console_GEEK on 30 Jul 2017, 22:16)

no reply until now and my other thread has 0 replies since 2017-07-13

hecatae wrote:
root@openwrt:~#   /sbin/vdsl_cpe_control --help 
DSL_CPE: Welcome to DSL CPI API control application
DSL_CPE: usage: [options]
DSL_CPE: following options are available:
DSL_CPE:  --help          (-h)    - help screen
DSL_CPE:  --version       (-v)    - display version
DSL_CPE:  --init          (-i)    - init device w/ <xtu> Bits seperated by underscore (e.g. -i05_01_04_00_04_01_00_00)
DSL_CPE:  --low_cfg       (-l)    - low level configuration file
DSL_CPE:  --console       (-c)    - start console
DSL_CPE:  --event_cnf     (-e)    - configure instance activation handling <enable/disable>[_mask] (e.g. -e1_1)
DSL_CPE:  --msg_dump      (-m)    - enable message dump
DSL_CPE:  --auto_scr_1    (-a)    - autoboot start script for ADSL (empty by default)
DSL_CPE:  --auto_scr_2    (-A)    - autoboot start script for VDSL (empty by default)
DSL_CPE:  --firmware1     (-f)    - firmware file, default /opt/ifx/firmware/xcpe_hw.bin
DSL_CPE:  --notif         (-n)    - notification script name, default ./xdslrc.sh
DSL_CPE:  --tcpmsg        (-t)    - enable dbgtool, listen only on <ipaddr> (optional, e.g. -t0.0.0.0)
DSL_CPE:  --multimode     (-M)    - set multimode config -M<NextMode>[_<AdslSubPref>] (e.g. -M1_1 or -M1)
DSL_CPE:  --tc-layer      (-T)    - set TC-Layer options -T<TcLayer>_<TcConfigUs>_<TcConfigDs> (e.g. -T2_0x3_0x1)
DSL_CPE:  --sequence      (-S)    - set activation sequence -S<Sequence>_<Mode> (e.g. -M0_0)
DSL_CPE:  --debug_drv     (-g)    - 
DSL_CPE:  --debug_app     (-G)    - 

nope, no save settings there, looks at:

root@openwrt:~# /sbin/vdsl_cpe_control --console

DSL_CPE#>help
   acog,          AutobootConfigOptionGet
   acos,          AutobootConfigOptionSet
   acs,           AutobootControlSet
   alf,           AutobootLoadFirmware
   asecg,         AutobootScriptExecuteConfigGet
   asecs,         AutobootScriptExecuteConfigSet
   asg,           AutobootStatusGet
   aufg,          AutobootUsedFirmwareGet
   alig,          AuxLineInventoryGet
   bbsg,          BandBorderStatusGet
   bpstg,         BandPlanSTatusGet
   bpsg,          BandPlanSupportGet
   dbgmlg,        DBG_ModuleLevelGet
   dbgmls,        DBG_ModuleLevelSet
   dmms,          DeviceMessageModifySend
   dms,           DeviceMessageSend
   esmcg,         EventStatusMaskConfigGet
   esmcs,         EventStatusMaskConfigSet
   fddg,          FilterDetectionDataGet
   fpsg,          FramingParameterStatusGet
   g997amdpfcg,   G997_AlarmMaskDataPathFailuresConfigGet
   g997amdpfcs,   G997_AlarmMaskDataPathFailuresConfigSet
   g997amlfcg,    G997_AlarmMaskLineFailuresConfigGet
   g997amlfcs,    G997_AlarmMaskLineFailuresConfigSet
   g997bang,      G997_BitAllocationNscGet
   g997bansg,     G997_BitAllocationNscShortGet
   g997cdrtcg,    G997_ChannelDataRateThresholdConfigGet
   g997cdrtcs,    G997_ChannelDataRateThresholdConfigSet
   g997csg,       G997_ChannelStatusGet
   g997dpfsg,     G997_DataPathFailuresStatusGet
   g997dfr,       G997_DeltFreeResources
   g997dhling,    G997_DeltHLINGet
   g997dhlinsg,   G997_DeltHLINScaleGet
   g997dhlogg,    G997_DeltHLOGGet
   g997dqlng,     G997_DeltQLNGet
   g997dsnrg,     G997_DeltSNRGet
   g997fpsg,      G997_FramingParameterStatusGet
   g997gang,      G997_GainAllocationNscGet
   g997gansg,     G997_GainAllocationNscShortGet
   g997lstg,      G997_LastStateTransmittedGet
   g997lacg,      G997_LineActivateConfigGet
   g997lacs,      G997_LineActivateConfigSet
   g997lfsg,      G997_LineFailureStatusGet
   g997lisg,      G997_LineInitStatusGet
   g997lig,       G997_LineInventoryGet
   g997listrg,    G997_LineInventorySTRingGet
   g997lis,       G997_LineInventorySet
   g997lsg,       G997_LineStatusGet
   g997lspbg,     G997_LineStatusPerBandGet
   g997ltsg,      G997_LineTransmissionStatusGet
   g997pmsft,     G997_PowerManagementStateForcedTrigger
   g997pmsg,      G997_PowerManagementStatusGet
   g997racg,      G997_RateAdaptationConfigGet
   g997racs,      G997_RateAdaptationConfigSet
   g997smr,       G997_SnmpMessageReceive
   g997sms,       G997_SnmpMessageSend
   g997sang,      G997_SnrAllocationNscGet
   g997sansg,     G997_SnrAllocationNscShortGet
   g997xtusecg,   G997_XTUSystemEnablingConfigGet
   g997xtusecs,   G997_XTUSystemEnablingConfigSet
   g997xtusesg,   G997_XTUSystemEnablingStatusGet
   help,          Help
   hsdg,          HybridSelectionDataGet
   ics,           InstanceControlSet
   isg,           InstanceStatusGet
   lecg,          LastExceptionCodesGet
   lfcg,          LineFeatureConfigGet
   lfcs,          LineFeatureConfigSet
   lfsg,          LineFeatureStatusGet
   locg,          LineOptionsConfigGet
   locs,          LineOptionsConfigSet
   lsg,           LineStateGet
   llsg,          LoopLengthStatusGet
   llcg,          LowLevelConfigurationGet
   llcs,          LowLevelConfigurationSet
   mlsg,          MiscLineStatusGet
   mfcg,          MultimodeFsmConfigGet
   mfcs,          MultimodeFsmConfigSet
   mfsg,          MultimodeFsmStatusGet
   nsecg,         NotificationScriptExecuteConfigGet
   nsecs,         NotificationScriptExecuteConfigSet
   pm15meet,      PM_15MinElapsedExtTrigger
   pmbms,         PM_BurninModeSet
   pmcc15mg,      PM_ChannelCounters15MinGet
   pmcc1dg,       PM_ChannelCounters1DayGet
   pmccsg,        PM_ChannelCountersShowtimeGet
   pmcctg,        PM_ChannelCountersTotalGet
   pmchs15mg,     PM_ChannelHistoryStats15MinGet
   pmchs1dg,      PM_ChannelHistoryStats1DayGet
   pmct15mg,      PM_ChannelThresholds15MinGet
   pmct15ms,      PM_ChannelThresholds15MinSet
   pmct1dg,       PM_ChannelThresholds1DayGet
   pmct1ds,       PM_ChannelThresholds1DaySet
   pmcg,          PM_ConfigGet
   pmcs,          PM_ConfigSet
   pmdpc15mg,     PM_DataPathCounters15MinGet
   pmdpc1dg,      PM_DataPathCounters1DayGet
   pmdpcsg,       PM_DataPathCountersShowtimeGet
   pmdpctg,       PM_DataPathCountersTotalGet
   pmdpfc15mg,    PM_DataPathFailureCounters15MinGet
   pmdpfc1dg,     PM_DataPathFailureCounters1DayGet
   pmdpfcsg,      PM_DataPathFailureCountersShowtimeGet
   pmdpfctg,      PM_DataPathFailureCountersTotalGet
   pmdpfhs15mg,   PM_DataPathFailureHistoryStats15MinGet
   pmdpfhs1dg,    PM_DataPathFailureHistoryStats1DayGet
   pmdphs15mg,    PM_DataPathHistoryStats15MinGet
   pmdphs1dg,     PM_DataPathHistoryStats1DayGet
   pmdpt15mg,     PM_DataPathThresholds15MinGet
   pmdpt15ms,     PM_DataPathThresholds15MinSet
   pmdpt1dg,      PM_DataPathThresholds1DayGet
   pmdpt1ds,      PM_DataPathThresholds1DaySet
   pmetr,         PM_ElapsedTimeReset
   pmlesc15mg,    PM_LineEventShowtimeCounters15MinGet
   pmlesc1dg,     PM_LineEventShowtimeCounters1DayGet
   pmlescsg,      PM_LineEventShowtimeCountersShowtimeGet
   pmlesctg,      PM_LineEventShowtimeCountersTotalGet
   pmleshs15mg,   PM_LineEventShowtimeHistoryStats15MinGet
   pmleshs1dg,    PM_LineEventShowtimeHistoryStats1DayGet
   pmlfc15mg,     PM_LineFailureCounters15MinGet
   pmlfc1dg,      PM_LineFailureCounters1DayGet
   pmlfcsg,       PM_LineFailureCountersShowtimeGet
   pmlfctg,       PM_LineFailureCountersTotalGet
   pmlfhs15mg,    PM_LineFailureHistoryStats15MinGet
   pmlfhs1dg,     PM_LineFailureHistoryStats1DayGet
   pmlic15mg,     PM_LineInitCounters15MinGet
   pmlic1dg,      PM_LineInitCounters1DayGet
   pmlicsg,       PM_LineInitCountersShowtimeGet
   pmlictg,       PM_LineInitCountersTotalGet
   pmlihs15mg,    PM_LineInitHistoryStats15MinGet
   pmlihs1dg,     PM_LineInitHistoryStats1DayGet
   pmlit15mg,     PM_LineInitThresholds15MinGet
   pmlit15ms,     PM_LineInitThresholds15MinSet
   pmlit1dg,      PM_LineInitThresholds1DayGet
   pmlit1ds,      PM_LineInitThresholds1DaySet
   pmlsc15mg,     PM_LineSecCounters15MinGet
   pmlsc1dg,      PM_LineSecCounters1DayGet
   pmlscsg,       PM_LineSecCountersShowtimeGet
   pmlsctg,       PM_LineSecCountersTotalGet
   pmlshs15mg,    PM_LineSecHistoryStats15MinGet
   pmlshs1dg,     PM_LineSecHistoryStats1DayGet
   pmlst15mg,     PM_LineSecThresholds15MinGet
   pmlst15ms,     PM_LineSecThresholds15MinSet
   pmlst1dg,      PM_LineSecThresholds1DayGet
   pmlst1ds,      PM_LineSecThresholds1DaySet
   pmrtc15mg,     PM_ReTxCounters15MinGet
   pmrtc1dg,      PM_ReTxCounters1DayGet
   pmrtcsg,       PM_ReTxCountersShowtimeGet
   pmrtctg,       PM_ReTxCountersTotalGet
   pmrths15mg,    PM_ReTxHistoryStats15MinGet
   pmrths1dg,     PM_ReTxHistoryStats1DayGet
   pmrtt15mg,     PM_ReTxThresholds15MinGet
   pmrtt15ms,     PM_ReTxThresholds15MinSet
   pmrtt1dg,      PM_ReTxThresholds1DayGet
   pmrtt1ds,      PM_ReTxThresholds1DaySet
   pmr,           PM_Reset
   pmsmg,         PM_SyncModeGet
   pmsms,         PM_SyncModeSet
   ptsg,          PilotTonesStatusGet
   quit,          Quit
   rccg,          RebootCriteriaConfigGet
   rccs,          RebootCriteriaConfigSet
   rusg,          ResourceUsageStatisticsGet
   se,            ScriptExecute
   sicg,          SystemInterfaceConfigGet
   sics,          SystemInterfaceConfigSet
   sisg,          SystemInterfaceStatusGet
   tmcs,          TestModeControlSet
   tmsg,          TestModeStatusGet
   vig,           VersionInformationGet

working through one by one, the snr commands above with g997 look the most promising

i found this but dont knows what each setting do, anyone please answer my questions

The discussion might have continued from here.