Hello, I am using Tp-Link CPE210 v1.1 router and also upgraded from tp-link to openwrt in it, but after some changes in my openwrt firmware, I again upgraded it using sysupgrade. Then router is not responding. After that I had downloaded original firmware of tp link for this router, and using tftp server it takes firmware as recovery.bin but also asking for vmlinuz. Please anyone help me in this situation. Thanks in advance.
Topic: tp-link CPE210 asking for vmlinuz using solarwinds tftp server
The content of this topic has been archived on 28 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1