Hi ,
I am facing some weared issue with the QCA9984 radio module.
I am using LED 17-01-1 release and on first time boot below is the output of iwconfig command:
wlan0 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
lo no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
eth2 no wireless extensions.
eth3 no wireless extensions.
wlan1 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
br-lan no wireless extensions.
eth4 no wireless extensions.
teql0 no wireless extensions.
But after change option disabled '1' to 0 in etc/config/wireless file and restart network wlan is disappeared even not showing after the reboot. below is my wireless config file:
config wifi-device 'radio0'
option type 'mac80211'
option channel '36'
option hwmode '11a'
option path 'soc/3500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
option htmode 'VHT80'
option disabled '0'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'LEDE'
option encryption 'none'
config wifi-device 'radio1'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path 'soc/3600000.pcie/pci0001:00/0001:00:00.0/0001:01:00.0'
option htmode 'HT20'
option disabled '0'
Is there any body face such issue ? or any suggestion to resolve this issue.
Thanks,
Sunil