I am trying to upload first time openwrt firmware upload from web UI
but its giving error like hardware not supported
My TP-Link model no CPE210 V1.1
is there any other way to update or is it issue with this hardware
Topic: CPE210 openwrt 15.01 update first time
The content of this topic has been archived on 14 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
There is issue with official 15.05.1 from CPE 210 Openwrt stable firmware which is not supported hardware V1.1
got help from yan.frank answer
downloaded firmware from trunk branch, issue resolved
You can follow these steps..
Connect the TP-Link CPE210 with your computer via ethernet
Set the IP address of your computer t0
Open your browser
Log in with user "admin" and password "admin", change the password in the next step
Go to the "System" tab and upload the OpenWrt firmware in the "Firmware Update" section and select "Restore" in the dialog promted
Follow official OpenWrt setup instructions (e.g. IP address of the device is now 192.168.1.1)
The discussion might have continued from here.
Page 1 of 1