Anyone can help me to flash firmware (stock or openwrt) to this device via serial port? It seems to be qualcomm qca9531-al3a. Thanks!
Image here: m.imgur.com/tLC0d81
Topic: TP-Link WPA4230p (qualcomm qca9531-al3a) flash via serial port
The content of this topic has been archived on 28 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
Why through serial? The original interface doesn't work?
Have you found the serial port pins?
Edit: What does the other side of the board look like?
(Last edited by mushi on 13 Mar 2017, 22:20)
The discussion might have continued from here.
Page 1 of 1