The content of this topic has been archived on 2 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hello to everyone!
Linksys released some years ago, some sources of different devices (linksys.com/us/support-article?articleNum=114663). In that list there is the WAG320N.
is it possibile use the original source with openwrt source to make the custom firmware?
(i'm also interested in adding hsmm mesh function)
thanks for your thought..
likely the only parts you would be interested in are the module(s) for the hardware, but first you need to compare them with current openwrt/kernel to see if there's a need of merges
thanks...
There is an howto/guide to follow? it's the first time for me....
The discussion might have continued from here.