OpenWrt Forum Archive

Topic: customized OpenWRT Project

The content of this topic has been archived on 10 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hello All :

We are looking for someone familiar with developing OpenWRT to have a customized openWRT firmware.

Please let me know if anyone can do the job or if you know where I should look for it.
Thanks

peter.blumstein wrote:

Hello All :

We are looking for someone familiar with developing OpenWRT to have a customized openWRT firmware.

Please let me know if anyone can do the job or if you know where I should look for it.
Thanks

I'd recommend you post the detailed requirements, the budget for the project and the contact information.

Ok Thank you. Here is the detailed requirement.

For regulatory purposes in a country ( Iran ) we need two firmware for Gateworks Avila 2348-4L and ADI engineering pronghorn 210 and 250 which are also the same platform . I will send you the data sheets.

Firmware number one :

1- a slight change in the GUI appearance. ( I will discuss more in the email )


Firmware number two :

1- same slight change in the GUI appearance as mentioned in number one.
2- regulatory domain country to be fixed to Iran. and no other country should be available as an option. So the wireless channels available will only be 5745 to 5825.
3- The firmware upgrade option in the software should be removed.
4- These changes should not be gone by applying reset factory of course.
5- With a secret keyboard combination the upgrade button appear.

* How much more will this cost if we want this for another platform ?

For budget please contact me.

peter.blumstein@excelnetworks,com

Thank you

The discussion might have continued from here.