The content of this topic has been archived on 19 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
I have a Comtrend Ar-5315u that have much of the other components of other comtren routers that support openwrt, like the ar-5387un...
How can i make the bin to install Openwrt in this router. I need to find drivers for the different components, I dont understand much of develop.
Pleasd, help. Thanks a lot.
You need a serial TTY connection.
Be aware : most board use 3.3volts for this
Use a cheap USB to serial(TTL) cable for this, most have 4 wires.
Don't connect the "red" wire to the board -> 5volts
Use this as example
https://forum.openwrt.org/viewtopic.php?id=67192
happy hacking
(Last edited by elektroman on 10 Oct 2016, 17:30)
The discussion might have continued from here.