Hi,
I am experimenting a strange behaviour from sysupgrade. I have flashed a
ubiquiti nanostation m5 using the factory firmware downloaded from the
openwrt website (CC 15.05.01 kernel 3.18.23).
Then I have decide to build my own firmware from the latest 15.05.01 (kernel
3.18.36).
However when I try to flash the router with the sysupgrade image (using either
luci or the command line) it seems that some partition is not updated. In fact
after rebooting I still find the old image with kernel 3.18.23. No error is reported
during the sysupgrade flashing procedure.
Moreover even if I do not specify "-n" the configuration is NOT preserved. Could
this be a bug?
R.