OpenWrt Forum Archive

Topic: Patch for the BCM43236 / Linksys 3200

The content of this topic has been archived on 16 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hello,

Could a kind developer give me a hand in trying out a patch?

I would like to try the following patch (for the BCM43236)

http://www.spinics.net/lists/linux-wire … 84418.html

Through, git, I have the sources for both OpenWRT and Lede. I have a Linksys 3200 here, just waiting for this patch.

I would need to know how to apply this patch -- I hope it would not be too complicated, and then compile it and try it out on the E3200.

Shibby Tomato has applied this patch and it works quite well.

ta, m.

just email the maintainer rafal@milecki.pl

Thank you for the tip -- I've just emailed rafal with a request to at least test the patch in OpenWRT.

If it works quite well in Shibby Tomato, I would hope it could work in OpenWRT.

And I really wish I could contribute to the code --- grr, it's irritating being so thick.

m.

mrmilk, did you ever get this working?

The discussion might have continued from here.