Topic: Gateworks Ventana GW5410 - Serial Console

The content of this topic has been archived on 16 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

Jackly

30 Jun 2016, 13:42

Hello All,

Currently we are accessing Serial Console of Ventana GW5410 board through JTAG programmer . We are now trying to access UART2 of GW5410 over RS232 of Board (J15 -Connector) using a locally assembled JS5 to DB9 connector. We referred the connections provided in GW5410 Operating manual document Sec. RS232 Serial Ports (J15) .

But we are not able to access the console . Please shed light on our issue .

Thanking you in advance

The discussion might have continued from here.

Page 1 of 1