Hi guys, I'm struggling with a cisco ip303, seemed to died. so I thought it well to connect a jtag232, and magically everything was working in putty, the problem and are now gone tilt:), now does not load the image "/bin/kosmos_ipp.st.gz" carry forward various attempts, I hope you can help me out for this situation.
Thank you
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 40sec later
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) rec
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) boot
Booting...
Model no: 6
LCD inited.
LED activated.
FSM init finished.
fsm_rec_params[0]=
fsm_rec_params[1]=
fsm_rec_params[2]=
fsm_rec_params[3]=
fsm_rec_params[4]=
fsm_rec_params[5]=
fsm_rec_params[6]=
fsm_rec_params[7]=
fsm_rec_params[8]=
Starting DHCP
Starting DHCP...
DHCP Done.
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 10sec later
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: 192.168.1.2
recv_if_addr = 0x941578c0received request for:192.168.1.2
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: 192.168.1.2
recv_if_addr = 0x941578c0received request for:192.168.1.2
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: 192.168.1.2
recv_if_addr = 0x941578c0received request for:192.168.1.2
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: 192.168.1.2
recv_if_addr = 0x941578c0received request for:192.168.1.2
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: 192.168.1.2
recv_if_addr = 0x941578c0received request for:192.168.1.2
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
IPA 169.254.87.1
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
MAC_PORT 1
SerialNumber CBT15330GG4
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) info
CHIP ID: TNETV1050 (0x7), REV: 0x2
MIPS Processor : 4KEc rev: 2.2.0
Cache mode : write-back, write-allocate.
Instruction cache: Associativity: 4, Line size: 16, Total size: 16KB
Data cache : Associativity: 4, Line size: 16, Total size: 16KB
Last reset cause: Hardware reset (Power-on reset)
EMIF is running at the same speed of the processor.
Processor running in big endian mode.
Processor clock is synchronous to internal bus clock.
(psbl) tftp
Usage: tftp [-i tftp-server ip] <src-file> <dst-file>
tftp [-r] <src_file> [optional args to application]
(psbl) tftp -i 192.168.1.1 spa.bin spa.bin
SUBNET_MASK not configured.
(psbl) tftp -i 192.168.1.1 255.255.255.0 spa.bin spa.bin
SUBNET_MASK not configured.
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) reboot
Basic POST completed... Success.
Last reset cause: Software reset (memory controller also reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) reboot
Basic POST completed... Success.
Last reset cause: Software reset (memory controller also reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl)
Booting...
Model no: 6
LCD inited.
LED activated.
FSM init finished.
fsm_rec_params[0]=
fsm_rec_params[1]=
fsm_rec_params[2]=
fsm_rec_params[3]=
fsm_rec_params[4]=
fsm_rec_params[5]=
fsm_rec_params[6]=
fsm_rec_params[7]=
fsm_rec_params[8]=
Starting DHCP
Starting DHCP...
DHCP Done.
Server is not responding. Retrying..Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 10sec later
Server is not responding. Retrying..
Server is not responding. Retrying..Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 20sec later
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 40sec later
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 80sec later
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 160sec later
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 320sec later
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 640sec later
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number:
recv_if_addr = 0x941578c0received request for:
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number:
recv_if_addr = 0x941578c0received request for:
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number:
recv_if_addr = 0x941578c0received request for:
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT 15330GG4
recv_if_addr = 0x941578c0received request for:CBT 15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT 15330GG4
recv_if_addr = 0x941578c0received request for:CBT 15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT 15330GG4
recv_if_addr = 0x941578c0received request for:CBT 15330GG4
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl)
Booting...
Model no: 6
LCD inited.
LED activated.
FSM init finished.
fsm_rec_params[0]=
fsm_rec_params[1]=
fsm_rec_params[2]=
fsm_rec_params[3]=
fsm_rec_params[4]=
fsm_rec_params[5]=
fsm_rec_params[6]=
fsm_rec_params[7]=
fsm_rec_params[8]=
Starting DHCP
Starting DHCP...
DHCP timed out.
SUBNET_MASK not configured.
recimg> rec
Model no: 6
LCD inited.
LED activated.
FSM init finished.
fsm_rec_params[0]=
fsm_rec_params[1]=
fsm_rec_params[2]=
fsm_rec_params[3]=
fsm_rec_params[4]=
fsm_rec_params[5]=
fsm_rec_params[6]=
fsm_rec_params[7]=
fsm_rec_params[8]=
Starting DHCP
Starting DHCP...
DHCP Done.
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 10sec later
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x94157890received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x94157890received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x94157890received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x94157890received request for:CBT15330GG4
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
IPA 169.254.87.1
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
MAC_PORT 1
SerialNumber CBT15330GG4
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) setpermenv
Usage: setpermenv <env var> <value>
(psbl) info
CHIP ID: TNETV1050 (0x7), REV: 0x2
MIPS Processor : 4KEc rev: 2.2.0
Cache mode : write-back, write-allocate.
Instruction cache: Associativity: 4, Line size: 16, Total size: 16KB
Data cache : Associativity: 4, Line size: 16, Total size: 16KB
Last reset cause: Hardware reset (Power-on reset)
EMIF is running at the same speed of the processor.
Processor running in big endian mode.
Processor clock is synchronous to internal bus clock.
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
IPA 169.254.87.1
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
MAC_PORT 1
SerialNumber CBT15330GG4
(psbl) setenv
Usage: setenv <env var> <value>
(psbl) setenv ipa 192.168.110.1
(psbl) setenv ipa 192.168.1.2
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
IPA 169.254.87.1
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
MAC_PORT 1
SerialNumber CBT15330GG4
ipa 192.168.1.2
(psbl) mini_https
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) [11~[11~[11~
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) setenv IPA 192.168.1.2
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
MAC_PORT 1
SerialNumber CBT15330GG4
ipa 192.168.1.2
IPA 192.168.1.2
(psbl) boot
Booting...
Model no: 6
LCD inited.
LED activated.
FSM init finished.
fsm_rec_params[0]=
fsm_rec_params[1]=
fsm_rec_params[2]=
fsm_rec_params[3]=
fsm_rec_params[4]=
fsm_rec_params[5]=
fsm_rec_params[6]=
fsm_rec_params[7]=
fsm_rec_params[8]=
Starting DHCP
Starting DHCP...
DHCP Done.
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 10sec later
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) unsetenv ipa
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
MAC_PORT 1
SerialNumber CBT15330GG4
IPA 192.168.1.2
(psbl) setenv MAC_PORT 0
(psbl) PRINTENV
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
MAC_PORT 0
(psbl) boot
Booting...
Model no: 6
LCD inited.
LED activated.
FSM init finished.
fsm_rec_params[0]=
fsm_rec_params[1]=
fsm_rec_params[2]=
fsm_rec_params[3]=
fsm_rec_params[4]=
fsm_rec_params[5]=
fsm_rec_params[6]=
fsm_rec_params[7]=
fsm_rec_params[8]=
Starting DHCP
Starting DHCP...
DHCP Done.
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 10sec later
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) help[3~
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) defragenv
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
MAC_PORT 0
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) setenv tftp
Usage: setenv <env var> <value>
(psbl) setenv tftp -i 192.168.1.1
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
MAC_PORT 0
tftp -i 192.168.1.1
(psbl) boot
Booting...
Model no: 6
LCD inited.
LED activated.
FSM init finished.
fsm_rec_params[0]=
fsm_rec_params[1]=
fsm_rec_params[2]=
fsm_rec_params[3]=
fsm_rec_params[4]=
fsm_rec_params[5]=
fsm_rec_params[6]=
fsm_rec_params[7]=
fsm_rec_params[8]=
Starting DHCP
Starting DHCP...
DHCP Done.
Trying to recover from Recovery URL
Trying to recover from Last Upgrade URL
backoff to: 10sec later
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Receive Recovery message, length = 160
op: 0
magic: 52 45 43 4d
Request command
Target device serial number: CBT15330GG4
recv_if_addr = 0x941578c0received request for:CBT15330GG4
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) [11~[11~
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) fmt
Calculated flash size: 8 MB
Formatting flash disk...
Flash Disk Unmounted
Calculated Flash file system size: 69 KB
FlashEraseBlock(b0030000,b004ffff);
..
Flash Disk Mounted
(psbl) fmt -a
Variable -a not set.
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
MAC_PORT 0
tftp -i 192.168.1.1
(psbl) dm
0xb4000000: aaaaaaaa 33333333 cccccccc 0f0f0f0f - ....3333........
0xb4000010: f0f0f0f0 00ff00ff ff00ff00 0000ffff - ................
0xb4000020: ffff0000 00000000 ffffffff 00000000 - ................
0xb4000030: 55555555 aaaaaaaa 33333333 cccccccc - UUUU....3333....
0xb4000040: 0f0f0f0f f0f0f0f0 00ff00ff ff00ff00 - ................
0xb4000050: 0000ffff ffff0000 00000000 ffffffff - ................
0xb4000060: 00000000 55555555 aaaaaaaa 33333333 - ....UUUU....3333
0xb4000070: cccccccc 0f0f0f0f f0f0f0f0 00ff00ff - ................
(psbl) setenv BOOTCFG m:f:mtd1
(psbl) reboot
Basic POST completed... Success.
Last reset cause: Software reset (memory controller also reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl)
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) fmtkosmos
FlashEraseBlock(b0050000,b014ffff);
................
(psbl) boot
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl) put
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) [11~[11~[11~
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl)
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl)
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) cp
Usage: cp <source file> <destintion file>
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
MAC_PORT 0
tftp -i 192.168.1.1
BOOTCFG m:f:mtd1
(psbl) unsetenv TFTP
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
MAC_PORT 0
tftp -i 192.168.1.1
BOOTCFG m:f:mtd1
(psbl) unsetenv TFTP
(psbl) UNsetenv
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) unsetenv tftp
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
MAC_PORT 0
BOOTCFG m:f:mtd1
(psbl) setenv MAC_PORT 1
(psbl) UNSETENV
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl)
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl)
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
BOOTCFG m:f:mtd1
MAC_PORT 1
(psbl) unsetenv BOOTCFG
(psbl) BOOT
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl)
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) fmtkosmos
FlashEraseBlock(b0050000,b014ffff);
................
(psbl) reboot
Basic POST completed... Success.
Last reset cause: Software reset (memory controller also reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl)
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) fa
Current Flash Allocation:
section : PSBL, base : 0xb0000000, size : 122176 bytes
section : ENV, base : 0xb0020000, size : 65536 bytes
section : RECOVERY, base : 0xb0030000, size : 131072 bytes
section : KOS, base : 0xb0050000, size : 1048576 bytes
section : FFS, base : 0xb0030000, size : 131072 bytes
unallocated Space Start: 0xb0150000
unallocated Space End : 0xb0800000
(psbl) fa help
Current Flash Allocation:
section : PSBL, base : 0xb0000000, size : 122176 bytes
section : ENV, base : 0xb0020000, size : 65536 bytes
section : RECOVERY, base : 0xb0030000, size : 131072 bytes
section : KOS, base : 0xb0050000, size : 1048576 bytes
section : FFS, base : 0xb0030000, size : 131072 bytes
unallocated Space Start: 0xb0150000
unallocated Space End : 0xb0800000
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) cat
Usage: cat <file-name>
(psbl) rm
Usage: rm <file-name>
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) fmt
Calculated flash size: 8 MB
Formatting flash disk...
Calculated Flash file system size: 128 KB
FlashEraseBlock(b0030000,b004ffff);
..
Flash Disk Mounted
(psbl) boot
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl) fa
Current Flash Allocation:
section : PSBL, base : 0xb0000000, size : 122176 bytes
section : ENV, base : 0xb0020000, size : 65536 bytes
section : RECOVERY, base : 0xb0030000, size : 131072 bytes
section : KOS, base : 0xb0050000, size : 1048576 bytes
section : FFS, base : 0xb0030000, size : 131072 bytes
unallocated Space Start: 0xb0150000
unallocated Space End : 0xb0800000
(psbl) boot
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) fmt
Calculated flash size: 8 MB
Formatting flash disk...
Flash Disk Unmounted
Calculated Flash file system size: 128 KB
FlashEraseBlock(b0030000,b004ffff);
..
Flash Disk Mounted
(psbl) boot
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) oclk
Usage: oclk -d
oclk <[-s sys_freq] [cpu_freq]>
Note : sys_freq and cpu_freq specified in MHz units
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
MAC_PORT 1
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
MAC_PORT 1
(psbl) boot
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl) help
reboot version info fa
printenv setenv setpermenv unsetenv
defragenv fmt fmtkosmos boot
dm oclk help ls
df cp cat rm
tftp upgrade
(psbl) fmtkosmos
FlashEraseBlock(b0050000,b014ffff);
................
(psbl) reboot
Basic POST completed... Success.
Last reset cause: Software reset (memory controller also reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl)
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl) tftp /bin/kosmos_ipp.st.gz
IPA_SVR not configured.
SUBNET_MASK not configured.
(psbl) setenv ipa_srv 192.168.1.1
(psbl) setenv IPAS
Usage: setenv <env var> <value>
(psbl) SETENV
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl) setenv IPA_SVR 192.168.1.1
(psbl) PRINTENV
Basic POST completed... Success.
Last reset cause: Hardware reset (Power-on reset)
PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.
Press ESC for monitor... 1
(psbl)
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.
OS boot failed.
(psbl) printenv
BUILD_OPS 0x977
bootloaderVersion 1.4.0.6
HWRevision Unknown
MODETTY0 9600,n,8,1,hw
PATH /bin:/ttyS
CPUFREQ 162500000
MIPSFREQ 87500000
SYSFREQ 87500000
PROMPT (psbl)
HWA_0 44:D3:CA:78:88:D0
HOSTNAME TNETV1050SDB
HWA_1 44:D3:CA:78:88:D1
SerialNumber CBT15330GG4
IPA 192.168.1.2
MAC_PORT 1
IPA_SVR 192.168.1.1
SUBNET_MASK 255.255.255.0
(psbl) unsetenv ipa_srv
(psbl) boot
Boot image "/bin/kosmos_ipp.st.gz" not found.
TFTP Failover error: TFTP_FO_FNAME not configured.