The content of this topic has been archived on 23 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Since support for WSR-600DHP has been added with https://dev.openwrt.org/changeset/43244 and an OpenWrt firmware image is available for download, I have created a dataentry for this device: https://wiki.openwrt.org/toh/hwdata/buf … wsr-600dhp
The support status is currently set to unknown (¿), since I couldn't find any confirmation for either 15.05 or trunk to be working on this device.
If you can confirm that either one of the above is working, please post your experiences here.
I've been using the existing Buffalo W<b>Z</b>R-600DHP builds. Works exactly like my WZR-HP-AG300H.
My question was more regarding the specific WSR-600DHP image.
https://downloads.openwrt.org/chaos_cal … pgrade.bin
https://downloads.openwrt.org/snapshots … pgrade.bin
I just bought this one without thinking straight.
I wanted to use it as a repeater, which it (kind of) advertises on its box. There is no other interface language than Japanese. :\
Sadly I have to report that trying to install either of the firmwares you linked through the interface does exactly nothing.
*EDITED to remove insults to Buffalo, since I noticed I could use it as a repeater anyways. 
(Last edited by compul on 17 Jan 2017, 07:01)
The discussion might have continued from here.