76 (edited by darkvier 2017-01-13 17:17:14)

Re: help to hex edit tp-link tl-wr841n v11

zdenek wrote:

Yes, I can confirm too that firmware with md5sum (downloaded from google drive)

06b2aea88fff92ea3f818756c3fed2fc  openwrt-ar71xx-generic-tl-wr841n-v11-squashfs-factory.bin

works, but lit only POWER led.

But previous firmware (downloaded from volatilesystems.org/dl/openwrt/targets/tl-wr841n-v11/)

b29d4f1467cbd818fa9d29ce52154e7e openwrt-ar71xx-generic-tl-wr841n-v11-squashfs-factory.bin

works in opposite mode. All leds except power.

Both firmware tested on one EU/11.0 device.

+1 to all
Trunks firm works all leds but no space for luci

EDIT: Flashing trunk, then shalzz95 build via sysupgrade terminal does all leds work
Maybe shalzz95 build has config problem?

My hardware:
v11.1 EU
QCA9533-BL3A
Winbond W9425G6KH-5
Flash winbond

Re: help to hex edit tp-link tl-wr841n v11

shalzz95 wrote:

The power led bug has been fixed in trunk.

I have backported the changes to 15.05.1

Here are the images if anyone wants to try.

drive.google.com/drive/folders/0B21lyv8 … sp=sharing

I have rebuilt the image from the top of the chaos_calmer tree with luci.
All led bugs should be fixed.

Re: help to hex edit tp-link tl-wr841n v11

Hi shalzz95,

I downloaded your file, but when I try to install it on my v11 tl-wr841n I get:

Error code: 18005

...version of the upgrade file was incorrect. Please check the filem name."

Thanks for any help you can provide.

Re: help to hex edit tp-link tl-wr841n v11

jim0266 wrote:

Hi shalzz95,

I downloaded your file, but when I try to install it on my v11 tl-wr841n I get:

Error code: 18005

...version of the upgrade file was incorrect. Please check the filem name."

Thanks for any help you can provide.

Have you used tftp method? Have you renamed file to wr841nv11_tp_recovery.bin ?

There is very detailed video guide how to do that, look for "Bricked TP-Link WR841N/ND Recovery Unbrick Without A Serial Connection" on youtube (I'm not allowed to send links)

I have the same router (eu version), just installed shalzz95's firmware image, seems to be working fine.

Thanks shalzz95!

Re: help to hex edit tp-link tl-wr841n v11

My english in not good...
But what i do...
I flashed my router with openwrt-ar71xx-generic-tl-wr841-v11-squashfs-factory.bin (LuCi is not work)
then I

cd /tmp
wget **link to openwrt-ar71xx-generic-tl-wr841n-v11-squashfs-factory.bin**
mtd -r write /tmp/openwrt-ar71xx-generic-tl-wr841n-v11-squashfs-factory.bin firmware

After that all works... testing....
I writed my massage from: OpenWrt Chaos Calmer 15.05.1 r49389 / LuCI for-15.05 branch (git-17.013.32081-d89b022)

81 (edited by natuanhn 2017-02-11 16:39:34)

Re: help to hex edit tp-link tl-wr841n v11

cd /tmp
wget **link to openwrt-ar71xx-generic-tl-wr841n-v11-squashfs-factory.bin**
mtd -r write /tmp/openwrt-ar71xx-generic-tl-wr841n-v11-squashfs-factory.bin firmware

What is the link?

Re: help to hex edit tp-link tl-wr841n v11

Can someone tell me the link to a firmware with build in GUI? Because i can't install luci because of the no space left.

Re: help to hex edit tp-link tl-wr841n v11

springfield89 wrote:

Can someone tell me the link to a firmware with build in GUI? Because i can't install luci because of the no space left.

It's linked few posts above by shalzz95.

Re: help to hex edit tp-link tl-wr841n v11

bw4517 wrote:
springfield89 wrote:

Can someone tell me the link to a firmware with build in GUI? Because i can't install luci because of the no space left.

It's linked few posts above by shalzz95.

Many thanks to you and shalzz95, it's working great !

I just had to scp the image to /tmp/ and then issued

sysupgrade -v openwrt-ar71xx-generic-tl-wr841n-v11-squashfs-sysupgrade.bin 

Again, much appreciated!

Re: help to hex edit tp-link tl-wr841n v11

Hello, I'm new to openwrt. I bought a random tp-link this week end to create a bridge. It happens to be a v11 (would have picked a better one if possible but I only discovered openwrt afterward...).

I've tried all tutorials (wifi & forum) and several openwrt versions (this one & trunk v11) to set the bridge up.

But to no avail...

The setup gives no error (can create all interfaces, and join the wifi from the main router) but in the end there is no communication between the main router and the other side of the bridge. Devices aren't managed by main router dhcp, and even with static ip I get no internet connection. The main router is an orange livebox.

It works with the tp link firmware.

Maybe there's a deeper issue with the v11 ?

86 (edited by paolocorpo 2017-04-21 14:49:10)

Re: help to hex edit tp-link tl-wr841n v11

shalzz95 wrote:
shalzz95 wrote:

The power led bug has been fixed in trunk.

I have backported the changes to 15.05.1

Here are the images if anyone wants to try.

drive.google.com/drive/folders/0B21lyv8 … sp=sharing

I have rebuilt the image from the top of the chaos_calmer tree with luci.
All led bugs should be fixed.

The two firmware provided by you and those provided by wiki in Instalaltion section
are the same ?
Thanks

87 (edited by telmocosta 2017-04-28 19:06:54)

Re: help to hex edit tp-link tl-wr841n v11

hi all, can i flash shalzz95 firm via origial GUI from tplink?
This img compiled by shalzz95 has built in LuCI, am i correct?
tks in advance.

btw, i have an v11 EU version.

Re: help to hex edit tp-link tl-wr841n v11

forget about it, i downgraded the original firmware to the moded unlocked one and then install the lede openwrt firm for v11. tks anyway.

Re: help to hex edit tp-link tl-wr841n v11

telmocosta how do you moded and unlocked original firmware?
I try to install openwrt but all times say the router :
"
Error code :18005
Upgrade unsuccessfully because the version of the upgraded file was incorrect.
Please check the file name.
"
or anybody can help me how to upgrade to openwrt my router?

Thanks!

90 (edited by paolocorpo 2017-06-27 17:04:01)

Re: help to hex edit tp-link tl-wr841n v11

@ frob
I suppose that you have a V11 hardware

You have to downgrade your firmware using this patched firmware  by NeDark
Here: https://drive.google.com/open?id=0B-S8e … VJTaWZEZ1U

And later you can upgrade to anyone Openwrt (or DDWRT) firmware

Re: help to hex edit tp-link tl-wr841n v11

thank you paolocorpo
yes I have V11 router

the modificated fw is working, but I install factory bin, and the luci doesn't start
I do half brick smile
because the dhcp server is working...
I try install generic/openwrt-ar71xx-generic-tl-wr841-v11-squashfs-factory.bin
Now I think should have try sysupgrade.bin not factory.bin

now my next problem, how I start LUCI or how upgrade another bin?
I read wiki.openwrt tl-wr841nd and I see only serial port use next upgrade...

Re: help to hex edit tp-link tl-wr841n v11

Now I reading and reading more post... I try to install LUCI

so I try to connect ma router via telnet, but connection refused
I try ssh  and yes connecting, but need the password, but openwrt wrote first time install the password is blank
how I connecting my router?
what is the default ssh password, and why doesn't connect simple telnet?
thanks!

Re: help to hex edit tp-link tl-wr841n v11

frob wrote:

thank you paolocorpo
yes I have V11 router

the modificated fw is working, but I install factory bin, and the luci doesn't start
I do half brick smile
because the dhcp server is working...
I try install generic/openwrt-ar71xx-generic-tl-wr841-v11-squashfs-factory.bin
Now I think should have try sysupgrade.bin not factory.bin

now my next problem, how I start LUCI or how upgrade another bin?
I read wiki.openwrt tl-wr841nd and I see only serial port use next upgrade...

Ciao,
I am sorry but I have not enough experience with OpenWrt firmware
I installed the alternatve offer coming from DDWRT
I suggest to you to reinstall the patched firmware by NeDark that I provided before and try to use DDWRT
Paolo

Re: help to hex edit tp-link tl-wr841n v11

Paolo
how I reinstall the patched firmware?

Re: help to hex edit tp-link tl-wr841n v11

working! smile
not to easy to me..
I write the steps
install my pc the mindnight commadner, easy copy to bin my router
and the ssh connect command is : ssh root@192.168.1.1
I copy the LEDE project file to the /tmp map
and
cd /tmp
  mtd write LEDE.bin firmware
  reboot

and welcome luci, I am very happy smile

Thanks Paolo!!!

Re: help to hex edit tp-link tl-wr841n v11

You can get LEDE with Luci on TL-WR841n?