OpenWrt Forum Archive

Topic: At last! Image for D-Link DSL-275xB rev. D1 is available!

The content of this topic has been archived on 27 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
angelos
19 Aug 2015, 15:33

I'm verry happy to see that there is an image for D-Link DSL-275xB rev. D1 available.

I've already put my 2750B into test, it seems to work OK.

I will probably edit this post so I can add more info...


/proc/cpuinfo

system type             : bcm63xx/AW5200B (0x6318/0xB0)
machine                 : D-Link DSL-2750B/DSL-2751 rev D1
processor               : 0
cpu model               : Broadcom BMIPS3300 V3.3
BogoMIPS                : 332.54
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : no
isa                     : mips1 mips2 mips32r1
ASEs implemented        :
shadow register sets    : 1
kscratch registers      : 0
package                 : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

kernel log:

[    0.000000] Linux version 4.1.5 (openwrt@gb-10) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46682) ) #1 Tue Aug 18 19:40:43 UTC 2015
[    0.000000] strap_override_bus = fffdffff
[    0.000000] Detected Broadcom 0x6318 CPU revision b0
[    0.000000] CPU frequency is 333 MHz
[    0.000000] 64MB of RAM installed
[    0.000000] board_bcm963xx: Boot address 0xb8000000
[    0.000000] board_bcm963xx: CFE version: 1.0.38-114.170
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00029033 (Broadcom BMIPS3300)
[    0.000000] board: board name: AW5200B
[    0.000000] MIPS: machine is D-Link DSL-2750B/DSL-2751 rev D1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 8039d850, node_mem_map 81002aa0
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
[    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 59592K/65536K available (2917K kernel code, 140K rwdata, 684K rodata, 1304K init, 188K bss, 5944K reserved, 0K cma-reserved)
[    0.000000] NR_IRQS:256
[    0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11479041721 ns
[    0.000020] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12897800188ns
[    0.008748] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.047066] pid_max: default: 32768 minimum: 301
[    0.052668] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.059482] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.076956] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.090536] NET: Registered protocol family 16
[    0.343024] registering PCI controller with io_map_base unset
[    0.379039] PCI host bridge to bus 0000:00
[    0.383339] pci_bus 0000:00: root bus resource [mem 0x10200000-0x102fffff]
[    0.390398] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.397384] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.404380] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.412633] pci 0000:00:00.0: [14e4:6318] type 01 class 0x060400
[    0.412798] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.413328] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.422012] pci 0000:01:00.0: [14e4:a8db] type 00 class 0x028000
[    0.422104] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[    0.422303] pci 0000:01:00.0: supports D1 D2
[    0.422766] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.422819] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    0.422905] pci 0000:00:00.0: BAR 8: assigned [mem 0x10200000-0x102fffff]
[    0.429943] pci 0000:01:00.0: BAR 0: assigned [mem 0x10200000-0x10207fff 64bit]
[    0.437464] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.442557] pci 0000:00:00.0:   bridge window [mem 0x10200000-0x102fffff]
[    0.451628] Switched to clocksource MIPS
[    0.459870] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[    0.465726] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[    0.471574] bcma: bus0: Found chip with id 43217, rev 0x01 and package 0x09
[    0.478781] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0)
[    0.487587] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
[    0.496528] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0)
[    0.524011] bcma: bus0: Bus registered
[    0.528617] NET: Registered protocol family 2
[    0.536286] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.543647] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.550268] TCP: Hash tables configured (established 1024 bind 1024)
[    0.557560] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.563744] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.571215] NET: Registered protocol family 1
[    0.575989] PCI: CLS 0 bytes, default 16
[    0.578796] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.591470] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.597586] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.609758] io scheduler noop registered
[    0.613908] io scheduler deadline registered (default)
[    0.622376] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36, base_baud = 1562500) is a bcm63xx_uart
[    0.632122] console [ttyS0] enabled
[    0.639266] bootconsole [early0] disabled
[    0.660586] m25p80 spi1.0: found mx25l6405d, expected m25p80
[    0.666463] m25p80 spi1.0: mx25l6405d (8192 Kbytes)
[    0.672219] bcm63xxpart: CFE boot tag found with version 6 and board type AW5200B
[    0.680063] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[    0.686728] bcm63xxpart: Partition 1 is kernel offset 10100 and length 13f779
[    0.694053] bcm63xxpart: Partition 2 is rootfs offset 14f879 and length 6a0787
[    0.701488] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000
[    0.708747] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000
[    0.716015] 5 bcm63xxpart partitions found on MTD device spi1.0
[    0.722108] Creating 5 MTD partitions on "spi1.0":
[    0.727065] 0x000000000000-0x000000010000 : "CFE"
[    0.734184] 0x000000010100-0x00000014f879 : "kernel"
[    0.741339] 0x00000014f879-0x0000007f0000 : "rootfs"
[    0.748592] mtd: device 2 (rootfs) set to be root filesystem
[    0.759422] 1 squashfs-split partitions found on MTD device rootfs
[    0.765877] 0x000000350000-0x0000007f0000 : "rootfs_data"
[    0.773617] 0x0000007f0000-0x000000800000 : "nvram"
[    0.780910] 0x000000010000-0x0000007f0000 : "linux"
[    0.825493] b53_common: found switch: BCM63xx, rev 0
[    0.831450] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.841855] NET: Registered protocol family 17
[    0.846708] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.859835] Bridge firewalling registered
[    0.863951] 8021q: 802.1Q VLAN Support v1.8
[    0.889991] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.925770] Freeing unused kernel memory: 1304K (803ba000 - 80500000)
[    2.802288] init: Console is alive
[    2.806282] init: - watchdog -
[    4.839449] init: - preinit -
[    5.588413] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[    5.661968] random: procd urandom read with 108 bits of entropy available
[    9.306808] random: nonblocking pool is initialized
[    9.342849] jffs2: notice: (235) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    9.370403] mount_root: switching to jffs2 overlay
[    9.473063] procd: - early -
[    9.476451] procd: - watchdog -
[   10.486667] procd: - ubus -
[   11.502120] procd: - init -
[   13.465751] NET: Registered protocol family 10
[   13.488049] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.527100] Loading modules backported from Linux version master-2015-07-21-0-g47cd203
[   13.535377] Backport generated by backports.git backports-20150626-0-gc1a4168
[   13.552549] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.590047] nf_conntrack version 0.5.0 (951 buckets, 3804 max)
[   13.700717] xt_time: kernel timezone is -0000
[   13.785473] cfg80211: World regulatory domain updated:
[   13.790838] cfg80211:  DFS Master region: unset
[   13.795294] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.805357] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.813589] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.821836] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   13.830093] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   13.839868] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   13.849641] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.857982] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.866233] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.086223] PPP generic driver version 2.4.2
[   14.097930] NET: Registered protocol family 24
[   14.554276] b43-phy0: Broadcom 43217 WLAN found (core revision 30)
[   14.562425] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17
[   14.568851] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 0
[   14.577683] Broadcom 43xx driver loaded [ Features: PNL ]
[   14.898361] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.728339] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[   29.288363] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[   29.321334] device eth0.1 entered promiscuous mode
[   29.326350] device eth0 entered promiscuous mode
[   29.349855] br-lan: port 1(eth0.1) entered forwarding state
[   29.355761] br-lan: port 1(eth0.1) entered forwarding state
[   31.359763] br-lan: port 1(eth0.1) entered forwarding state
[   32.752103] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   32.862705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.899601] device wlan0 entered promiscuous mode
[   40.944450] br-lan: port 2(wlan0) entered forwarding state
[   40.950229] br-lan: port 2(wlan0) entered forwarding state
[   40.956131] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   42.951667] br-lan: port 2(wlan0) entered forwarding state

system log:

Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.437464] pci 0000:00:00.0: PCI bridge to [bus 01]
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.442557] pci 0000:00:00.0:   bridge window [mem 0x10200000-0x102fffff]
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.451628] Switched to clocksource MIPS
Wed Aug 19 14:05:47 2015 kern.warn kernel: [    0.459870] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Wed Aug 19 14:05:47 2015 kern.warn kernel: [    0.465726] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.471574] bcma: bus0: Found chip with id 43217, rev 0x01 and package 0x09
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.478781] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.487587] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.496528] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.524011] bcma: bus0: Bus registered
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.528617] NET: Registered protocol family 2
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.536286] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.543647] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.550268] TCP: Hash tables configured (established 1024 bind 1024)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.557560] UDP hash table entries: 256 (order: 0, 4096 bytes)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.563744] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.571215] NET: Registered protocol family 1
Wed Aug 19 14:05:47 2015 kern.debug kernel: [    0.575989] PCI: CLS 0 bytes, default 16
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.578796] futex hash table entries: 256 (order: -1, 3072 bytes)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.591470] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.597586] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.609758] io scheduler noop registered
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.613908] io scheduler deadline registered (default)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.622376] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36, base_baud = 1562500) is a bcm63xx_uart
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.632122] console [ttyS0] enabled
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.639266] bootconsole [early0] disabled
Wed Aug 19 14:05:47 2015 kern.warn kernel: [    0.660586] m25p80 spi1.0: found mx25l6405d, expected m25p80
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.666463] m25p80 spi1.0: mx25l6405d (8192 Kbytes)
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.672219] bcm63xxpart: CFE boot tag found with version 6 and board type AW5200B
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.680063] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.686728] bcm63xxpart: Partition 1 is kernel offset 10100 and length 13f779
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.694053] bcm63xxpart: Partition 2 is rootfs offset 14f879 and length 6a0787
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.701488] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.708747] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.716015] 5 bcm63xxpart partitions found on MTD device spi1.0
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.722108] Creating 5 MTD partitions on "spi1.0":
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.727065] 0x000000000000-0x000000010000 : "CFE"
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.734184] 0x000000010100-0x00000014f879 : "kernel"
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.741339] 0x00000014f879-0x0000007f0000 : "rootfs"
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.748592] mtd: device 2 (rootfs) set to be root filesystem
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.759422] 1 squashfs-split partitions found on MTD device rootfs
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.765877] 0x000000350000-0x0000007f0000 : "rootfs_data"
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.773617] 0x0000007f0000-0x000000800000 : "nvram"
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.780910] 0x000000010000-0x0000007f0000 : "linux"
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.825493] b53_common: found switch: BCM63xx, rev 0
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.831450] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.841855] NET: Registered protocol family 17
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.846708] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    0.859835] Bridge firewalling registered
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.863951] 8021q: 802.1Q VLAN Support v1.8
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.889991] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Wed Aug 19 14:05:47 2015 kern.info kernel: [    0.925770] Freeing unused kernel memory: 1304K (803ba000 - 80500000)
Wed Aug 19 14:05:47 2015 user.info kernel: [    2.802288] init: Console is alive
Wed Aug 19 14:05:47 2015 user.info kernel: [    2.806282] init: - watchdog -
Wed Aug 19 14:05:47 2015 user.info kernel: [    4.839449] init: - preinit -
Wed Aug 19 14:05:47 2015 kern.info kernel: [    5.588413] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    5.661968] random: procd urandom read with 108 bits of entropy available
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    9.306808] random: nonblocking pool is initialized
Wed Aug 19 14:05:47 2015 kern.notice kernel: [    9.342849] jffs2: notice: (235) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Aug 19 14:05:47 2015 user.info kernel: [    9.370403] mount_root: switching to jffs2 overlay
Wed Aug 19 14:05:47 2015 user.info kernel: [    9.473063] procd: - early -
Wed Aug 19 14:05:47 2015 user.info kernel: [    9.476451] procd: - watchdog -
Wed Aug 19 14:05:47 2015 user.info kernel: [   10.486667] procd: - ubus -
Wed Aug 19 14:05:47 2015 user.info kernel: [   11.502120] procd: - init -
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.465751] NET: Registered protocol family 10
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.488049] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.527100] Loading modules backported from Linux version master-2015-07-21-0-g47cd203
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.535377] Backport generated by backports.git backports-20150626-0-gc1a4168
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.552549] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.590047] nf_conntrack version 0.5.0 (951 buckets, 3804 max)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.700717] xt_time: kernel timezone is -0000
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.785473] cfg80211: World regulatory domain updated:
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.790838] cfg80211:  DFS Master region: unset
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.795294] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.805357] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.813589] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.821836] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.830093] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.839868] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.849641] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.857982] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   13.866233] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   14.086223] PPP generic driver version 2.4.2
Wed Aug 19 14:05:47 2015 kern.info kernel: [   14.097930] NET: Registered protocol family 24
Wed Aug 19 14:05:47 2015 kern.info kernel: [   14.554276] b43-phy0: Broadcom 43217 WLAN found (core revision 30)
Wed Aug 19 14:05:47 2015 kern.info kernel: [   14.562425] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17
Wed Aug 19 14:05:47 2015 kern.info kernel: [   14.568851] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 0
Wed Aug 19 14:05:47 2015 kern.info kernel: [   14.577683] Broadcom 43xx driver loaded [ Features: PNL ]
Wed Aug 19 14:05:47 2015 kern.debug kernel: [   14.898361] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Aug 19 14:05:48 2015 kern.info kernel: [   20.728339] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
Wed Aug 19 14:05:53 2015 authpriv.info dropbear[677]: Not backgrounding
Wed Aug 19 14:05:56 2015 daemon.info procd: - init complete -
Wed Aug 19 14:05:57 2015 kern.info kernel: [   29.288363] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
Wed Aug 19 14:05:57 2015 kern.info kernel: [   29.321334] device eth0.1 entered promiscuous mode
Wed Aug 19 14:05:57 2015 kern.info kernel: [   29.326350] device eth0 entered promiscuous mode
Wed Aug 19 14:05:57 2015 kern.info kernel: [   29.349855] br-lan: port 1(eth0.1) entered forwarding state
Wed Aug 19 14:05:57 2015 kern.info kernel: [   29.355761] br-lan: port 1(eth0.1) entered forwarding state
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Interface 'lan' is enabled
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Interface 'lan' is setting up now
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Interface 'lan' is now up
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Interface 'loopback' is enabled
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Interface 'loopback' is now up
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Network device 'eth0' link is up
Wed Aug 19 14:05:57 2015 daemon.notice netifd: VLAN 'eth0.1' link is up
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Network device 'lo' link is up
Wed Aug 19 14:05:57 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Aug 19 14:05:58 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Aug 19 14:05:59 2015 kern.info kernel: [   31.359763] br-lan: port 1(eth0.1) entered forwarding state
Wed Aug 19 14:06:00 2015 daemon.notice netifd: radio0 (776): Configuration file: /var/run/hostapd-phy0.conf
Wed Aug 19 14:06:00 2015 kern.info kernel: [   32.752103] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
Wed Aug 19 14:06:00 2015 kern.info kernel: [   32.862705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Aug 19 14:06:00 2015 user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Wed Aug 19 14:06:00 2015 kern.info kernel: [   32.899601] device wlan0 entered promiscuous mode
Wed Aug 19 14:06:00 2015 daemon.notice netifd: radio0 (776): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Aug 19 14:06:00 2015 daemon.notice netifd: radio0 (776): ACS: Automatic channel selection started, this may take a bit
Wed Aug 19 14:06:00 2015 daemon.notice netifd: radio0 (776): wlan0: interface state COUNTRY_UPDATE->ACS
Wed Aug 19 14:06:00 2015 daemon.notice netifd: radio0 (776): wlan0: ACS-STARTED
Wed Aug 19 14:06:01 2015 daemon.info dnsmasq[892]: started, version 2.75 cachesize 150
Wed Aug 19 14:06:01 2015 daemon.info dnsmasq[892]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Wed Aug 19 14:06:01 2015 daemon.info dnsmasq[892]: DNS service limited to local subnets
Wed Aug 19 14:06:01 2015 daemon.info dnsmasq[892]: using local addresses only for domain lan
Wed Aug 19 14:06:01 2015 daemon.info dnsmasq[892]: reading /tmp/resolv.conf.auto
Wed Aug 19 14:06:01 2015 daemon.info dnsmasq[892]: using local addresses only for domain lan
Wed Aug 19 14:06:01 2015 daemon.info dnsmasq[892]: using nameserver 192.168.1.1#53
Wed Aug 19 14:06:01 2015 daemon.info dnsmasq[892]: read /etc/hosts - 1 addresses
Wed Aug 19 14:06:01 2015 daemon.info dnsmasq[892]: read /tmp/hosts/dhcp - 1 addresses
Wed Aug 19 14:06:02 2015 daemon.notice netifd: radio0 (776): handle_probe_req: send failed
Wed Aug 19 14:06:02 2015 daemon.notice netifd: radio0 (776): handle_probe_req: send failed
Wed Aug 19 14:06:04 2015 authpriv.info dropbear[945]: Child connection from 192.168.1.100:49382
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Channel 1 has insufficient survey data
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Channel 1 has insufficient survey data
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Channel 1 has insufficient survey data
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Channel 1 has insufficient survey data
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Channel 1 has insufficient survey data
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Survey is missing channel time
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): ACS: Channel 1 has insufficient survey data
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): wlan0: ACS-COMPLETED freq=2412 channel=1
Wed Aug 19 14:06:07 2015 daemon.notice netifd: radio0 (776): Using interface wlan0 with hwaddr xx:xx:xx:xx:xx:xx and ssid "OpenWrt"
Wed Aug 19 14:06:08 2015 kern.info kernel: [   40.944450] br-lan: port 2(wlan0) entered forwarding state
Wed Aug 19 14:06:08 2015 kern.info kernel: [   40.950229] br-lan: port 2(wlan0) entered forwarding state
Wed Aug 19 14:06:08 2015 kern.info kernel: [   40.956131] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Wed Aug 19 14:06:08 2015 daemon.notice netifd: radio0 (776): wlan0: interface state ACS->ENABLED
Wed Aug 19 14:06:08 2015 daemon.notice netifd: radio0 (776): wlan0: AP-ENABLED
Wed Aug 19 14:06:09 2015 daemon.notice netifd: Network device 'wlan0' link is up

Luci status:

http://s9.postimg.org/halkmwjhr/2750b_d1_wrt.png

(Last edited by angelos on 31 Oct 2015, 11:23)

Post #2
garis
5 Sep 2015, 09:55

By installing that firmware you have lost the integrated modem, right?
By the way, if someone is interested, I tested the .bin and seems not working on my DSL 2750B ( I notice that the .bin of wrt contains "Board id AW5200B", but my router with the stock firmware give me "Board id AW5200U", the last letter change).

(Last edited by garis on 6 Sep 2015, 15:10)

Post #3
cccmikey
31 Oct 2015, 05:53

I just tried to load this firmware into my DSL-2750B

The installation failed immediately with the error:

DSL Router Update 

Uploading failed. The selected file is illegal.

Other information:

Model Name: DSL-2750B 
Time and Date: Thu Jan 1 00:10:25 1970
Firmware Version: AU_3.06
Hardware Version: T1

I guess my model differs from yours. Anything I can do to make it work?

Cheers, Mike.

Post #4
angelos
31 Oct 2015, 11:21

No, you can't do anything to make it work.
If you open the firmware file of each device with a HEX editor, you'll notice the arch is different.


2750B Rev D1 is Broadcom 6318:
---------------------------------------------------
http://s12.postimg.org/uto99erzx/image.png


2750B Rev T1 is Broadcom 6328:
---------------------------------------------------
http://s16.postimg.org/6ltp8v339/image.png

(Last edited by angelos on 31 Oct 2015, 11:25)

Post #5
cccmikey
31 Oct 2015, 11:24

Oh well. Thanks for letting me know smile I'll stick with my TL-WA901ND and it's 4MB of flash for now.

Post #6
rybakowskijakub
1 Nov 2015, 01:09

Hi. I have DSL-2750B D1. I upgrade firmware whit this file and i have "invalid image format".

Post #7
angelos
1 Nov 2015, 11:36

Flashing from the D-Link web interface is not possible, you get the below message as you already mentioned:

http://s3.postimg.org/6yd7takub/000.png

Just use the "failsafe" interface.

1.) Power off the device.
2.) Press the reset button.
3.) Power on the device while holding the reset button pressed.
4.) Wait for about 5 seconds, you'll notice the power led changes color.
5.) Open a web browser and go to http://192.168.1.1
     You will see this page:

http://s3.postimg.org/s9arxk2yr/001.png

6.) Upload the OpenWrt image.
7.) After about 3 minutes the device is ready. smile

http://s9.postimg.org/3x79v2etr/002.png

Post #8
dlinkfan
8 Nov 2015, 18:47

Hello,

It's working here too with https://downloads.openwrt.org/snapshots … fs-cfe.bin

DESIGNATED DRIVER (Bleeding Edge, r47373)
system type        : bcm63xx/AW5200B (0x6318/0xB0)
machine            : D-Link DSL-2750B/DSL-2751 rev D1
processor        : 0
cpu model        : Broadcom BMIPS3300 V3.3
BogoMIPS        : 332.54
wait instruction    : yes
microsecond timers    : yes
tlb_entries        : 32
extra interrupt vector    : yes
hardware watchpoint    : no
isa            : mips1 mips2 mips32r1
ASEs implemented    :
shadow register sets    : 1
kscratch registers    : 0
package            : 0
core            : 0
VCED exceptions        : not available
VCEI exceptions        : not available

I can't test the modem right now but I think it doesn't work.

Working as Routed AP.

I will play a little bit with things I'm interested in, like peerguardian, tor, the USB and I'll make a report here.


Edit:


It's a complete fail.

I can't configure USB,

[  131.714043] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  131.742699] ehci-platform: EHCI generic platform driver
[  131.850907] ehci-platform ehci-platform: EHCI Host Controller
[  131.856987] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[  131.865709] ehci-platform ehci-platform: irq 50, io mem 0xb0005000
[  131.882860] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
[  131.898607] hub 1-0:1.0: USB hub found
[  131.911235] hub 1-0:1.0: 1 port detected
[  180.795450] usb 1-1: new high-speed USB device number 2 using ehci-platform
[  663.840622] usb 1-1: USB disconnect, device number 2
[  669.594098] usb 1-1: new high-speed USB device number 3 using ehci-platform

but no disk appears in /dev. Tested with USB key, HDD, vfat, ext4 and swap. I missed something.


Edit 2:


I don't understand what I did wrong during 3 days. Now everything is working perfectly.

In my case:

opkg install kmod-scsi-core kmod-usb-core kmod-usb2 kmod-usb-storage kmod-fs-ext4 block-mount swap-utils

I followed the wiki and configured /overlay on /dev/sda2 and a swap on /dev/sda3.

Peerguardian doesn't exist anymore. Tor, I tried, it's ok, maybe later.

For now I'm using Transmission with a big partition on /dev/sda1.

The router is configured as wireless repeater, simplest configuration, wifi client on my main network (also OpenWrt) and lan on 192.168.2.1, this way it is completely autonomous.

I'm very happy, OpenWrt is the best!

(Last edited by dlinkfan on 25 Nov 2015, 17:54)

Post #10
rybakowskijakub
22 Nov 2015, 22:00

Openwrt work on this router. Only DSL not working and HT40. Somebody fix it ?

Post #11
ahmed7
22 Nov 2015, 23:03

DSL doesn't work on all BCM63XX routers

Post #12
rybakowskijakub
22 Nov 2015, 23:15

And wifi 802.11n 40mhz (HT40)?

Post #13
ahmed7
22 Nov 2015, 23:24

There was a bug in Atheros chip, but it's fixed
https://dev.openwrt.org/ticket/12720
Also, D1 doesn't have Atheros chip, so i think it's working

Post #14
rybakowskijakub
23 Nov 2015, 00:00

When
        option 'htmode' 'HT40'
        list 'ht_capab' 'HT40+'

I get
daemon.notice netifd: radio0 (7437): Driver does not support configured HT capability [HT40*]

Post #15
Niravsoft
4 Mar 2016, 16:16

I would like to know if it supports even 150 mbps? Mine is a TD-W8960N V5 which is having the same processor and wireless chip combination. But mine supports only 802.11g modes (54 mbps max.) Its wiki can be found at https://wiki.openwrt.org/toh/plusnet/fast2704nv1 .
BTW b43 doesn't mostly support HT mode.
If you can please also make a wiki for your device on openwrt and by chance if your device is exactly similar to mine, then you can add your device to that wiki.

The discussion might have continued from here.