The content of this topic has been archived on 13 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hello @all,
is anyone using 802.11r with WPA2 Personal AES.
Since r45051 it's supported in /etc/config/wireless.
I read the wiki but for the params r0kh, r1kh, r1_key_holder i am not quite clear what i should enter.
Can anyone provide a example-config for following example:
Two access points connected over lan. Both configured with same ssid, password, encryption.
First access point mac: 00:11:22:33:44:55
Second access point mac: AA:BB:CC:DD:EE:FF
Thanks
anyone?
I have the same problem. There is no complete doc or HowTo on the implementation. A document or maybe a LUCI interface for Newbie would be great.
Any news on this??
Any news on this??
Hi,
I just did a Google search, and found these three tickets:
The last ticket has lots of config file info, but are they correct? Given that jow says to report upstream to hostapd developers it doesn't look promising ATM. The first ticket may have an important tidbit on how to configure wpa_supplicant.conf.
Clemmitt
P.S.: May not help but here's a patch from Patchwork Ozlabs.
(Last edited by cmsigler on 10 Mar 2016, 19:08)
The discussion might have continued from here.