i download source from "git clone git://git.openwrt.org/openwrt.git" ... and i build a firmware with that source by choosing target as mt7621 .. following files got generated ... but when i flash "openwrt-15.05-rc2-ramips-mt7621-mt7621-squashfs-sysupgrade.bin
" on the development platform ... it did't bootup ... looks like kernal is not starting ..
openwrt-15.05-rc2-ramips-mt7621-dir-860l-b1-squashfs-factory.bin
openwrt-15.05-rc2-ramips-mt7621-dir-860l-b1-squashfs-sysupgrade.bin
openwrt-15.05-rc2-ramips-mt7621-firewrt-squashfs-sysupgrade.bin
openwrt-15.05-rc2-ramips-mt7621-mt7621-squashfs-sysupgrade.bin
openwrt-15.05-rc2-ramips-mt7621-wsr-1166-squashfs-sysupgrade.bin
openwrt-15.05-rc2-ramips-mt7621-wsr-600-squashfs-sysupgrade.bin
my mtd partation as follow...
dev: size erasesize name
mtd0: 00800000 00010000 "ALL"
mtd1: 00030000 00010000 "Bootloader"
mtd2: 00010000 00010000 "Config"
mtd3: 00010000 00010000 "Factory"
mtd4: 007b0000 00010000 "Kernel"
but when i see the example regarding the flash layout ... the partation has rootfs +kernal as well .. like
mtd0: 00020000 00010000 "u-boot"
mtd1: 00140000 00010000 "kernel"
mtd2: 00690000 00010000 "rootfs"
mtd3: 00530000 00010000 "rootfs_data"
mtd4: 00010000 00010000 "art"
mtd5: 007d0000 00010000 "firmware"
........
Do i have change the flash layout ? ....because when i flash the compiled image ..on boot ..its is showing 1.1 Mb in Data Size .. but i load 3.3Mb size of firmware ..