Apologies in advance if this has been asked and answered, if it has I was unable to find a resolution.
Have a TP-Link WR1043ND with Chaos Calmer loaded, seems to be working good. In playing with it I was trying to get a prolific USB serial port to setup as a serial console. Just in case I lost access but the device was not bricked. the PL2303 driver loads fine and the device is set to ttyUSB0. With that being said, when I connect to the serial port with SecureCRT on a windows system all I see at 115200 is garbage characters. Actually, a constant string of "p" scrolling across the terminal session. Have the setting set to 115200, 8, n, 1 with no flow control. I'm using a null modem cable.
Thanks in advance.