OpenWrt Forum Archive

Topic: Router as wifi Client for internet and give IP for local router client

The content of this topic has been archived on 1 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hi, I have 2 TP-Link, and i install DD-WRT.
I try to figure how to connect one router as a wifi client..
I don't have any answer on DD-WRT forum (look not really active)

I have TL-WR1043ND and tl-wr941nd for now i have DD-WRT but i will flash it with OpenWRT (I just check for incompatibility for 104ND)

I alreally install OpenWRT on my old Linksys WRT54G smile But it not working anymore wink

With OpenWRT is it possible to make something like this :
IN GREEN THE NODE I CONTROL. (Is to make a private network with a internet access share by the big network)
FUTURE INSTALLATION

Thx

Yes it is possible.

The discussion might have continued from here.