Hello All,
I use openwrt for over one year now, and, at this time, I will want to apply the update from https://downloads.openwrt.org/snapshots … i/generic/

But after a few worries, my Cubieboard fails to finish the boot system.
The Log is here:

http://pastebin.com/Wnd6tJSC

I note, the problem: init: failed to symlink /tmp -> /var
That's all

Can you help me, please?

For what are you using Cubieboard? Can you give a bit more info how did you do upgrade?

Thank for your help,

Y boot on microcard, and for the upgrade, I reset the entire microcard with download and copie all new file from https://downloads.openwrt.org/snapshots … i/generic/

With the 24042015 version, the boot stop here  [    1.514068] Freeing unused kernel memory: 212K (c0505000 - c053a000)
[    1.632284] usb 1-1: New USB device found, idVendor=7392, idProduct=7711
[    1.639376] init: failed to symlink /tmp -> /var
[    1.644088] init: Console is alive
[    1.647583] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.654970] init: - watchdog -
[    1.658461] usb 1-1: Product: 802.11 n WLAN
[    1.662646] usb 1-1: Manufacturer: Ralink
[    1.667428] usb 1-1: SerialNumber: 1.0
[    2.658748] init: - preinit -
Detected cubieboard // Cubietech Cubieboard
[    2.722188] random: mktemp urandom read with 7 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    5.788771] mount_root: mounting /dev/root
[    5.793296] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[    5.812834] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.823342] procd: - early -
[    5.826837] procd: - watchdog -
[    7.315569] procd: - ubus -
[    8.326023] procd: - init -
Please press Enter to activate this console.
[    9.935169] NET: Registered protocol family 10
[    9.952594] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.995060] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.019875] nf_conntrack version 0.5.0 (16021 buckets, 64084 max)
[   10.125117] sun4i-emac 1c0b000.ethernet: eth0: at f01d6000, IRQ 18 MAC: 02:d1:0d:01:ee:e3
[   10.159852] xt_time: kernel timezone is -0000
[   10.202579] PPP generic driver version 2.4.2
[   10.224539] NET: Registered protocol family 24

my dhcp server  have not log from the cubieboard.
I'm despite.

That's it!
I have access by Screen with the serial port!
But I do not know why!
I did not either, eth0, but it's not bad!

But, now, my problème is, no regulator 5V!!!! Is disabled!!!
Edit:
Ok, The problem, no module kmod-ata-sunxi
installed...
That's work.

(Last edited by rsuinux on 25 Apr 2015, 16:23)