ADB VV3212

Firmware Version:VV3212_SLT_3.1.0.0013 - main
Platform Version:3.0.0.0030
Hardware Version: BCM63168

root@localhost:~# cat /proc/cpuinfo
system type             : 963168MBV17ADGV
processor               : 0
cpu model               : Broadcom4350 V8.0
BogoMIPS                : 399.36
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
ASEs implemented        :
shadow register sets    : 1
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

unaligned exceptions            : 1234458
processor               : 1
cpu model               : Broadcom4350 V8.0
BogoMIPS                : 402.43
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
ASEs implemented        :
shadow register sets    : 1
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

unaligned exceptions            : 1234458
______________________________________________________________________

opkg.conf
src/gz snapshots http://downloads.openwrt.org/snapshots/ … 7/packages

Please *ipk ftdi_sio
off ???
_______________________________________________________________________

Package: kmod-usb-serial-ftdi
Version: 2.6.30-1
Depends: kernel (= 2.6.30-1), kmod-usb-core
Architecture: bcm412l07

Please use complete sentences.

2.6.30 is very old -> not supported

Broadcom4350 on a ADB VV3212 (slovak telekom) VDSL
(963168MBV17ADGV = ODM Code?)
-> Broadcom 63168

similar router: Huawei HG658c (HG658BZV Ver. A
https://forum.openwrt.org/viewtopic.php?id=49676
no support in openwrt atm

I just need a driver ftdi_sio for this router from kernel versions 2.6.30 moreover I have already authorized

FTP - / root -OK
Telnet - OK
Extended offer web disordered - OK

Please ftdi_sio

Again:

No "ADB VV3212" listed in
- http://wiki.openwrt.org/doc/hardware/so … om.bcm63xx
- https://dev.openwrt.org/browser/trunk/t … ?rev=20420 (and image/Makefile or listed in image/README.images-bcm63xx )
Look yourself!

You have to ask you Provider / Vendor for GPL Package and compile the module by yourself.