The content of this topic has been archived on 4 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hello,
I have successfully installed Openwrt on Cisco ON-100 platform, that is Marvell Kirkwood (1,6Ghz), 512MB DDR3 RAM, 512MB NAND Flash, 2x 1Gbps ethernet interfaces (one with PoE), 1x USB port, SD-CARD slot, no WIFI interfaces.
Have a look at the description over here:
http://www.filedropper.com/ciscoon100-openwrt-howto
Product video:
https://www.youtube.com/watch?v=FwP2kTn9WgM
Thanks,
Tom.
Hi, your link doesn't seem to work. Do you have another link to your instructions? I have a few of these new in the box laying around.
Thanks,
Yes please it would be nice to find something to do with the now useless ON100 
Hello,
I have successfully installed Openwrt on Cisco ON-100 platform, that is Marvell Kirkwood (1,6Ghz), 512MB DDR3 RAM, 512MB NAND Flash, 2x 1Gbps ethernet interfaces (one with PoE), 1x USB port, SD-CARD slot, no WIFI interfaces.
Have a look at the description over here:
http://www.filedropper.com/ciscoon100-openwrt-howtoProduct video:
https://www.youtube.com/watch?v=FwP2kTn9WgMThanks,
Tom.
Your filedropper link appears to be dead. Can you provide information on getting serial access to u-boot?
Thanks,
Ray
here it goes:
http://s000.tinyupload.com/index.php?fi … 2255778170
here it goes:
http://s000.tinyupload.com/index.php?fi … 2255778170
WOW. Thank you so very much for that guide Tom. Probably saved me a dozen hours trying to find it all out myself.
Do you know where we can get the file named "u-boot-db88f6282bp_400ddr3db_nand.bin" ? I know it says optional but I would like to flash this other UBoot version if possible.
Thanks in advance !
The discussion might have continued from here.