Hey team! Has anyone attempted loading OpenWrt on a TP-Link Archer D9?
At this point I can't even work out how to flash it with the firmware (since it rejects it in the OEM web utility). Attempts to halt the normal boot process by pushing/holding random buttons to allow a TFTP transfer have not been successful (not sure if it is client or server, or if it even allows TFTP transfers for firmware). Thoughts on how it might be done?
I have put the details I know about it here: https://bc.whirlpool.net.au/bc/hardware … el_id=1560
I will create a hardware page in the OpenWrt table of hardware also. I have just now finished pulling the router apart, taking photos, and putting back together again. Will post them in time also.