Hello guys,
I hope some geek will see this and come back to me...

I got a very cheap unit as mentioned above, and mangled with it. I tried both debian and ubuntu on it with much success, but the cpu of this model is capped at 400 MHz. This is causing a very annoying 5 Mb/s write rate while using raid-5.

I wonder if it is possible to set the cpu speed to the 600MHz as the 80219 it is using clearly supports this speed.
After carefully reading http://wiki.openwrt.org/toh/evaluation. … erclocking - it came clear to me that this is totally doable through RedBoot, providing I know  the registers that control the cpu settings. Can any of you hackers tell me a way to find those registers ? Is there a way to debug or disassemble the redboot image I copied from my unit ?

Intel has given out the a bunch of source code for that model but not the redboot part