I have an annoying user problem, which I want to disable. I hope this is possible.
I've found the following note on the wiki page:
http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd
Note2: From versions 1.8 up to 2.x holding the reset button for more than 30' resets to OpenWRT initial settings.
Is the built in reset controlled by software or by the hardware (SoC) of the router or is it a feature of OpenWRT?
I want to disable this button. Some people press the button for more than 30 seconds to get WPS working, because "WPS/Reset" is printed above the button and this way they reset the router to default configuration.
(Last edited by fa11enangel on 28 Apr 2014, 13:32)