booting from the msata superspeed 16Gb SSD........ somehow i think its not seeing the drive.
[ 0.000000] Linux version 3.3.8 (blogic@buildserver-1) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Mon Sep 3 15:03:09 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000df14e000 (usable)
[ 0.000000] BIOS-e820: 00000000df14e000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000f9000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0xdf14e max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Warning only 895MB will be used.
[ 0.000000] Use a HIGHMEM enabled kernel.
[ 0.000000] found SMP MP-table at [c00f25b0] f25b0
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037fa0000
[ 0.000000] ACPI: RSDP 000f2590 00014 (v00 CORE )
[ 0.000000] ACPI: RSDT df162424 00044 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP df164ce8 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT df1624c8 027DA (v02 PCENG COREBOOT 00010001 INTL 20121114)
[ 0.000000] ACPI: FACS df164ca8 00040
[ 0.000000] ACPI: SPCR df164ddc 00050 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET df164e30 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC df164e68 0005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST df164ec8 00198 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT df165060 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT df1666f0 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT df166a00 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] 895MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37fa0000
[ 0.000000] low ram: 0 - 37fa0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037fa0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000df14e
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227375
[ 0.000000] Kernel command line: root=/dev/sda2 rootfstype=ext4 rootwait console=tty0 console=ttyS0,38400n8 noinitrd reboot=bios
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 904752k/917120k available (2660k kernel code, 11916k reserved, 790k data, 308k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] vmalloc : 0xf87a0000 - 0xfffa0000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7fa0000 ( 895 MB)
[ 0.000000] .init : 0xc135f000 - 0xc13ac000 ( 308 kB)
[ 0.000000] .data : 0xc1299260 - 0xc135ee40 ( 790 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1299260 (2660 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 999.915 MHz processor.
[ 0.020003] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.83 BogoMIPS (lpj=9999150)
[ 0.038390] pid_max: default: 32768 minimum: 301
[ 0.040071] Mount-cache hash table entries: 512
[ 0.050203] mce: CPU supports 6 MCE banks
[ 0.060028] CPU: AMD G-T40E Processor stepping 00
[ 0.080093] ACPI: Core revision 20120111
[ 0.094840] Performance Events: AMD PMU driver.
[ 0.110007] ... version: 0
[ 0.120004] ... bit width: 48
[ 0.130004] ... generic registers: 4
[ 0.140004] ... value mask: 0000ffffffffffff
[ 0.150004] ... max period: 00007fffffffffff
[ 0.160004] ... fixed-purpose events: 0
[ 0.170004] ... event mask: 000000000000000f
[ 0.180104] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.190377] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.200000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.200000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.200000] ..... (found apic 0 pin 0) ...
[ 0.210000] ....... failed.
[ 0.210000] ...trying to set up timer as Virtual Wire IRQ...
[ 0.317271] ..... works.
[ 0.330000] NET: Registered protocol family 16
[ 0.330707] ACPI: bus type pci registered
[ 0.340180] PCI: PCI BIOS revision 2.10 entry at 0xfd49f, last bus=4
[ 0.350003] PCI: Using configuration type 1 for base access
[ 0.360002] PCI: Using configuration type 1 for extended access
[ 0.374848] bio: create slab <bio-0> at 0
[ 0.380135] ACPI: Added _OSI(Module Device)
[ 0.390005] ACPI: Added _OSI(Processor Device)
[ 0.400004] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.410004] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.422493] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.451531] ACPI: Interpreter enabled
[ 0.460003] ACPI: (supports S0 S5)
[ 0.471695] ACPI: BIOS offers _BFS
[ 0.480003] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org
[ 0.490003] ACPI: Using IOAPIC for interrupt routing
[ 0.512325] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.520247] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.530256] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.540006] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.550005] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.560005] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xffffffff]
[ 0.570100] PCI host bridge to bus 0000:00
[ 0.580006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.590004] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.600005] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.610004] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.623148] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.630334] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.640166] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.650126] pci 0000:00:15.0: PCI bridge to [bus 04-04]
[ 0.661106] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
[ 0.691643] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.715624] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.739260] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.750725] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.777281] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.790726] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[ 0.810159] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.834474] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.858476] SCSI subsystem initialized
[ 0.860449] PCI: Using ACPI for IRQ routing
[ 0.870591] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.882808] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.892034] Switching to clocksource hpet
[ 0.900161] pnp: PnP ACPI init
[ 0.909396] ACPI: bus type pnp registered
[ 0.923315] pnp: PnP ACPI: found 5 devices
[ 0.935651] ACPI: ACPI bus type pnp unregistered
[ 0.993798] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 1.009467] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 1.027742] pci 0000:00:04.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.048099] pci 0000:00:04.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
[ 1.071323] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 1.086992] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 1.105274] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.125632] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref]
[ 1.148855] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 1.164539] pci 0000:00:15.0: PCI bridge to [bus 04-04]
[ 1.180433] NET: Registered protocol family 2
[ 1.193612] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.215250] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.238587] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 1.258885] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.278771] TCP reno registered
[ 1.288208] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 1.305715] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 1.324649] NET: Registered protocol family 1
[ 1.338817] perf: AMD IBS detected (0x000000ff)
[ 1.352533] scx200: NatSemi SCx200 Driver
[ 1.376867] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.394430] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 1.423817] msgmni has been set to 1767
[ 1.435649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.457864] io scheduler noop registered
[ 1.469632] io scheduler deadline registered (default)
[ 1.486334] isapnp: Scanning for PnP cards...
[ 1.911866] isapnp: No Plug & Play device found
[ 1.925615] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 1.965550] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.004364] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.024840] Non-volatile memory driver v1.3
[ 2.039583] scsi0 : pata_legacy
[ 2.049285] ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 2.221940] scsi1 : pata_legacy
[ 2.231660] ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 2.402075] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.424120] i8042: No controller found
[ 2.435605] mousedev: PS/2 mouse device common for all mice
[ 2.452731] rtc_cmos 00:01: RTC can wake from S4
[ 2.466789] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.485149] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 2.503705] Refined TSC clocksource calibration: 999.999 MHz.
[ 2.520943] Switching to clocksource tsc
[ 2.532801] cpuidle: using governor ladder
[ 2.545329] TCP cubic registered
[ 2.555078] NET: Registered protocol family 17
[ 2.568442] 8021q: 802.1Q VLAN Support v1.8
[ 2.581075] Using IPI Shortcut mode
[ 2.592229] rtc_cmos 00:01: setting system clock to 2014-08-20 23:53:17 UTC (1408578797)
[ 2.616769] Waiting for root device /dev/sda2...
(Last edited by auzziedingo on 21 Aug 2014, 07:20)