hello
I tplink wdr3500 install openwrt truck by serial connexion but I see this in kenerl panic :s
help
The content of this topic has been archived on 7 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
hello
I tplink wdr3500 install openwrt truck by serial connexion but I see this in kenerl panic :s
help
post full log of your procedure to flash it.
looks like you have wrong kernel size
0x000000020000-0x000000124e5c : "kernel"
[ 0.730000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.740000] 0x000000124e5c-0x0000007f0000 : "rootfs"
it must be ends with 0000
that's normal, check any bootlog..
you do not need to write kernel partition from a running system
What steps should I take to fix this kernel panic?
thanks
https://forum.openwrt.org/viewtopic.php … 95#p228295
what file did you flash (link!)? how? post every detail of what you did.
download the version of http://downloads.openwrt.org/snapshots/trunk/ar71xx/
the factory
http://downloads.openwrt.org/snapshots/ … actory.bin
and sysupgrade
http://downloads.openwrt.org/snapshots/ … pgrade.bin
went up from the web interface frimare proprietary tplink.
8 tplink wdr 3500 that I got this error: s
The discussion might have continued from here.