OpenWrt Forum Archive

Topic: Oolite I2C Problem

The content of this topic has been archived on 17 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
babylon99_de
21 Feb 2014, 11:02

Hello together,

I am using the oolite board (it´s similar to the wr703n with one big difference, the pins are soldered to the outside)

But I am not able to get i2c running ;(

putty 2
putty 1

Do you know which component is missing?

I´ve installed "# opkg install kmod-i2c-gpio-custom kmod-i2c-core" without a problem

If you need any further information, please let me know.....

(Last edited by babylon99_de on 21 Feb 2014, 11:06)

Post #2
MBS
21 Feb 2014, 19:42

You could try with modprobe, since it resolves dependencies of modules. Otherwise, "lsmod | grep i2c" might help.

The discussion might have continued from here.