III. Compilation
1.
After
proper
make
files
~/openwrt/attitude_adjustment folder:
configuring
run
the
following
commands
from
./scripts/feeds update -i
./scripts/feeds install hello
2. Open configuration menu once again
make menuconfig
3. Find our package
Utilites ----> hello
And put [M] package parameter to it
4. Press Exit two times to exit and save
5. Run the following command
make package/hello/compile
In case of successful compilation, a ready hello_0-1_ar71xx.ipk executive file will appear in
~/openwrt/attitude_adjustment/bin/ar71xx/packages for starting on FlexRoad.

everything worked great but i help with step 3. how do i guide it the package and where do i put the [M].
Im super noob never used Linux before.it taken 1 month week ends and after work to get this far.This came from the step by step guide some parts were hard to understand but i got this far and im lost. NEED HELP.

if i put my post in the wrong place please move it .

Well better link the source material next time, what you had posted is a pain to read
http://www.componentality.com/res/Step- … -HW.en.pdf

in make menuconfig, search for the package and press the space bar and the m will appear

thanks thats the one i used to get this far it,s ok but for noobs it still hard to understand.I found this one and it helped out a lot.
http://www.thepowerbase.com/2012/01/ope … to-finish/