The content of this topic has been archived on 21 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hello All,
I purchased Tp link WDR4300 (Dual channel) and ported OpenWRT (Attitude adjustment). The router is working is fine. I want to disable the 5GHz channel and want to use the other 2.4GHz channel.
I want to use it as a repeater using single channel (2.4GHz). Can any one tell me how to do it as i am new to openWRT.
(Last edited by sreekanth.a on 11 Sep 2013, 15:29)
The 2nd radio is hardware-limited to 5GHz, you cannot change that.
As jow said, you can not reconfigure the 5GHz radio to work at 2.4GHz.
But, disable the 5GHz radio and use the 2.4GHz radio both as cient and AP to make a repeater.
Check:
http://wiki.openwrt.org/doc/recipes/bridgedclient
https://forum.openwrt.org/viewtopic.php?id=39077
Hello Jow & daby64,
Thank you for your support.
I will test this and let you know.
The discussion might have continued from here.