OpenWrt Forum Archive

Topic: HG553, can ping, but no telnet/ssh/tftp

The content of this topic has been archived on 24 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Im using Huawei HG553

Yesterday, i have a bad setting that blocked the router, so i have to do a 30sec reset.
Unfortunately i use the jffs2 128k rom that doesn't support failsave, so when i opened 192.168.1.1 luci no found and no admin panel. Honestly i don't know whats the different between jffs2 & squashfs when i install it.

I'm able to ping the router, so i know  it's alive.
But when i want to connect with Telnet / SSh it returned "refused".
Don't have any success with tftp as well.

Is there anything i can do revive the router?
Is it bricked yet?

problem solved.

looks like i got stuck with browser cache, the failsafe process did run, but i get redirected to the luci not found page, after clearing the cache, i can re upload the firmware. and everything back to normal.

hello gays a have problem plz help
i have router hg553 i try to flash hem witsh openwrt-HW553-squashfs-cfe like this tutorial in this website  i do step by step but the router is like dead noting to show and the I'm not able to ping the router, so i know  it's dead but wen i conect the router tp pc via cable i show

(Last edited by dwaywa on 11 Sep 2016, 16:05)

The discussion might have continued from here.