OpenWrt Forum Archive

Topic: Are this caps suitable for MAX232N and MAX3232

The content of this topic has been archived on 19 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
Experimentator
25 Jul 2013, 20:53

Hi, I decided to make level converters with MAX232 and MAX3232.

For MAX232N caps are:       10uF 16V 105C Fujicon
                                         1.0uF 50V 105C Fujicon

For MAX3232 caps are:      100nF 50V X7R P2.5 


Thanks !

Post #2
dabyd64
26 Jul 2013, 00:44

Are you asking if that capacitor are correct for those devices? If so, yes.

Post #3
Experimentator
26 Jul 2013, 12:33

Thanks for your replay. And I think so, but I was not sure about the voltage of caps.

Post #4
Experimentator
27 Jul 2013, 22:36

Sorry for double post but my IC is MAX3232EID. Are the caps suitable (caps for MAX3232 in my first post) ?

Thanks !

The discussion might have continued from here.