I ask this because today I've decided to flash trunk image to WR841ND v.7 that I used for a week in WDS setup with WR741ND and another WR1043ND v.1
I flashed this http://downloads.openwrt.org/snapshots/ … pgrade.bin via LUCI web interface. MD5 hash match the one from the repository.
I chose to preserve the configuration. After flashing I cannot access the web interface any longer and Wi-Fi is disabled. Only SSH. The network address and the password remained the same as configured previously. Can anyone explain what should I do. Can I reflash a new firmware or reset to default settings via SSH or TFTP. Does the trunk image have LUCI built-in or it has to be installed separately. I cold rebooted via power adapter but it' just the same. Did I brick the router or I just didn't know how to configure it properly.
Please help.

I reset the router to default settings. Obviously the trunk doesn't have Luci built-in. I've installed it later. The issue was that with this trunk version the wireless didn't work. I reverted back to AA 12.09. Can anyone explain how to configure opkg to fetch the packages locally.
Here I can see this.

Local Repositories
You can configure opkg to fetch the packages locally:
src/gz local file:////path/to/packagesDirectory

So if I am under windows and the files lie on C:\path\to\packagesDirectory how does this line have to look in opkg.conf file.
Does it only apply to the router file system.

I've created a ticket https://dev.openwrt.org/ticket/13696

(Last edited by sppmaster on 13 Jun 2013, 14:00)